Owner's Manual

Back to Contents Page

Guide in the docs directory or on
support.dell.com/support/edocs/software/omswrels/index.htm.
Remote
Enablement
Server
Administrator
CLI+
Instrumentation
Service + CIM
Provider
Install Remote Enablement to perform remote systems
management tasks. You can install Remote Enablement on your
system and install only the Server Administrator Web Server on
another system (say, system X). You can then use system X to
remotely monitor and manage your system. You can use system X
to manage any number of systems on which Remote Enablement is
installed.
SupportedDellPowerEdgesystems.Foralistofsupported
DellPowerEdgesystems,seethe
Dell Systems Software Support
Matrix on
support.dell.com/support/edocs/software/omswrels/index.htm
Remote Access
Controller
Server
Administrator
CLI +
Instrumentation
Service + iDRAC
or DRAC 5, or
DRAC 4
(depending on
the type of your
DellPowerEdge
system)
Install Remote Access Service to receive e-mail alerts for warnings
or errors related to voltages, temperatures, and fan speeds.
Remote Access Service also logs event data and the most recent
crash screen (available only on systems running Microsoft Windows
operating system) to help you diagnose the probable cause of a
system crash.
Only those systems on which you have installed Server
Instrumentation or Remote Enablement.
Intel SNMP
Agent
Intel SNMP
Agent
Install this SNMP agent to enable Server Administrator to obtain
information about Network Interface Cards (NICs). This SNMP agent
helps identify the NICs.
Only on Dell PowerEdge systems on which Server Instrumentation
is installed and which are running on the Microsoft Windows
operating system.
Broadcom
SNMP Agent
Broadcom SNMP
Agent
Install this SNMP agent to enable Server Administrator to obtain
information about NICs. This SNMP agent helps identify the NICs.
Only on Dell PowerEdge systems on which Server Instrumentation
is installed and which are running on the Microsoft Windows
operating system.