Owner's Manual

l The ucd-snmp or net-snmp package that is provided with the operating system must be installed if you use SNMP to manage your server. If you want
to use supporting agents for the ucd-snmp or net-snmpagent,youmustinstalltheoperatingsystemsupportfortheSNMPstandardbeforeyouinstall
Server Administrator. For more information about installing SNMP, see the installation instructions for the operating system you are running on your
system.
rpm --import <OM DVD mountpoint>/SYSMGMT/srvadmin/
linux/RPM-GPG-KEY
l In case of Red Hat Enterprise Linux 6, install the wsman and sblim packages from the operating system DVD. To install these packages:
c. In the Package selection screen, select Basic Server.
d. Select Customize now and click Next.
e. Select the System Management group
f. From the sub-category, select the Web-based Enterprise Management ® Optional Packages option.
The default selected packages are:
¡ openwsman-client
¡ sblim-sfcb
¡ sblim-wbemcli
¡ wsmancli
Deselect the sblim-wbemcli package from the above list.
g. Select the openwsman-server and click Next.
h. After the operating system installation, install the below packages from the operating system DVD or through yum utility:
¡ libcmpiCppImpl0
l Install all the prerequisite RPMs required for successful installation.
If your system had VMware ESX (version 4 or 4.1) factory-installed, Red Hat Enterprise Linux (versions 5.x and 6), or SUSE Linux Enterprise Server
(version 10 and 11), see the "Dependent RPMs for Remote Enablement" section for information on any RPMs that you need to manually install prior to
installing managed system software. Typically, you may not need to manually install any RPMs.

Installing Managed System Software Using Dell-Provided Media
The Dell OpenManage installer usesRPMstoinstalleachcomponent.Themedia(DVD)isdividedintosubdirectoriestoenableeasycustominstallation.
To review the software before you install it, follow this procedure:

1. Load the Dell Systems Management Tools and DocumentationDVDintoyoursystem'sDVDdrive.

2. Mount the DVD, if required.

3. When you have mounted the DVD, navigate to:
<mount point>/SYSMGMT/srvadmin/linux/
The installation script and RPM folder are available under the linux directory.

Express Install
Use the provided shell script to perform the express installation.

1. Log on as root to the system running the supported operating system where you want to install the managed system components.

2. Insert the Dell Systems Management Tools and Documentation DVD into the DVD drive.

3. Mount the DVD, if required.

4. Navigate to <mount point>/SYSMGMT/srvadmin/linux/supportscripts directory.

5. Run the srvadmin-install.sh shell script as shown below, which performs an express installation. The setup program installs following the managed
system software features:
NOTE: When installing RPM packages, to avoid warnings concerning the RPM–GPG key, import the key with a command similar to the following:
NOTE: On the Red Hat Enterprise Linux 5.x operating system, DVDs are auto-mounted with the -noexec mount option. This option does not allow you to
run any executable from the DVD. Manually mount the DVD and then run executables.
NOTE: On the Red Hat Enterprise Linux 5.x operating system, DVDs are auto-mounted with the -noexec mount option. This option does not allow you to
run any executable from the DVD. Manually mount the DVD and then run executables.