Owner's Manual

Utilities in Dell OpenManage IT Assistant 285
Install MSDE
• Command: dcdbmng /N or dcdbmng /n
• Description: Silently installs MSDE.
NOTE: The MSDEx85.exe and iss files must be placed in the correct location.
Start Server
• Command: dcdbmng /T or dcdbmng /t
• Description: Starts the
MSSQLServer service.
Stop Server
• Command: dcdbmng /P or dcdbmng /p
• Description: Stops the MSSQLServer service.
Suppress Messages
When you run the Database Management Utility as a command line
application, you receive messages when commands succeed or fail.
The command to suppress messages halts these notifications.
• Command: dcdbmng /S
• Description: Runs without displaying any messages (whether the action
was successful or unsuccessful). This command is useful if you are running
the utility from a batch file.
NOTE: Using /S with no other option causes the command to be ignored.
Simple Network Management Protocol Event
Source Import Utility
You can import multiple event sources, not natively supported in IT
Assistant, into the IT Assistant database.
Create a text file containing the appropriate event source information.
After creation, this text file will not be available for sharing between multiple
users of the product.
Run a Command Line Interface (CLI) utility (you can find this utility in
<install folder of IT Assistant>/bin) to import the text file data into the
IT Assistant database.