Owner's Manual

Utilities in Dell OpenManage IT Assistant 279
The last line of the file must have a line feed in it. You can also use any
combination of the subnet formats supported by the IT Assistant user
interface. It is important to make sure that each entry is the correct format
because the import node list utility does not check and validate the format
for you.
2 Save the file and specify a filename, for example, nodelist.txt .
Sample Import Node List Utility Commands
Import the nodes from the file nodelist.txt:
importnodelist nodelist.txt
Delete the templates used after a successful import:
importnodelist -delete
Import the nodes from the file nodelist.txt, delete the templates used after
a successful import, and use "my_template" as the default template name:
importnodelist nodelist.txt -delete -default
my_template
Creating Templates
To create a template for import node list utility, follow these general steps:
1
In Discovery and Monitoring , select Ranges .
2 Right-click Include Ranges in the Discovery Ranges tree and select New
Include Range...
.
3 In the New Discovery Wizard-Step 1 of 6 , select Host Name .
4 Enter the template name in Host Name (for example, template_1).
5 Complete the wizard by entering the required protocol configurations.
Template_1 can be used in import node list utility.