Owner's Manual

270 Configuring Protocols to Send Information to IT Assistant
CAUTION: The sample scripts are provided as examples only and have not been
tested nor are they warranted in any way by Dell; Dell disclaims any liability in
connection therewith. Dell provides no technical support with regard to content
herein. The script has been written to reconfigure a new non-tampered default
snmp.xml and snmpd.conf files present on a ESX 4.0 System.
You can find the sample script in the ITAssistant\esx4_sample_script folder.
The parameters that can be passed to this script are described in table A-2:
Table A-2. Parameters for the Sample Script
For example, you can run the following command:
py ita_esx4_snmp_setup.py -c -p -t
Parameter Description
-c|--community Community name
-p|--port Port Number
-t|--target Target value for sending traps
-f|--force Overwrite and already configured port
-d|--Debug Debug mode
-l|--LogFile Name of the log file with complete path
information. The default log file is
/tmp/ita_esx4_snmp_setup.log
-v|--Verbose level (minimal=0 (errors only), default=1 (error
and warning), maximum=2 (all types of errors))
-h|--help Displays the help.
-doc|--document Displays the script content