Owner's Manual

260 Configuring Protocols to Send Information to IT Assistant
3 Click Services . The services list is displayed in the right pane.
4 Locate and double-click SNMP Service . The SNMP Service properties
window is displayed.
5 Select the Security tab and click Add under Accepted community names .
The
SNMP Service Configuration window appears.
6 Select READ ONLY in the Community rights drop-down menu and type
a case-sensitive string in the
Community name field.
Click
Add .
7 Select Accept SNMP packets from these hosts , and click Add again.
8 In the SNMP Service Configuration dialog box type localhost or the
IP address of the management station in
Host name, IP or IPX address .
Click
Add .
9 Click the Traps tab. Enter a case-sensitive string in the Community name
field and click
Add to list .
NOTE: You may enter the same string that you entered in step 6.
10 Click Add under the Trap destinations field and type localhost or the
IP address of the management station in
Host name, IP or IPX address
and click
Add .
Click
OK .
11 Right-click SNMP Service and select Restart .
12 Select SNMP Trap Service and ensure that the status is displayed as
Started and the Startup Type is Automatic .