Owner's Manual

164 Managing Tasks
IPMI Command Line
Choosing IPMI Command Line from the pull-down menu allows you to
execute IPMI commands.
For more information, see the Dell OpenManage IT Assistant Online Help.
Remote Client Instrumentation Command Line
Choosing Remote Client Instrumentation Command Line allows you to
execute client instrumentation commands remotely including sideband
interface management.
You can view this option only if you have Dell OpenManage Client
Connector (OMCC) installed on your management station.
Creating a Device Control Task
A device control task helps you to power control a system through
IT Assistant.
To perform these tasks in IT Assistant, perform the following steps:
1
Select Manage  Ta sk s and right-click Device Control in the left
navigation pane.
2 Select New Task .
The Task Creation wizard appears.
3 Enter a Task Name , then choose, for example, Shutdown Device from the
Tas k Type pull-down menu and click Next .