Owner's Manual

176 Reporting
NOTE: If you want to run reports on RAC devices, and choose RAC type as one of
the attributes to include in the report, the generated report lists numerical values in
the RAC type column. These values are mapped as follows:
0 = Not Available
2 = DRAC II
8 = DRAC III/DRAC 4/DRAC5
12 = DRAC 5
16 = Dell OpenManage Baseboard Management Controller (BMC)
32 = iDRAC
48 = Dell Chassis Management Controller (CMC)
64 = BMC
80 = iDRAC6
96 = iDRAC6
Compliance Tool Report
IT Assistant provides an easy launch point on the user interface (UI) to
generate a comprehensive compliance report for all systems being managed.
This report provides an overall system compliance status for each managed
system for BIOS, firmware and driver versions.
To create a compliance tool report, perform the following steps:
1
Click Tools  Compliance Tool .
2 Click Open or Save from the File Download dialog box to either save
the file to a location of your choice or to view the report as
a Microsoft Excel file.
Run Query
NOTE: You can click Run Query
to test a query before saving it.
Runs the query and displays the results.
Save Query Saves the query.
Cancel Closes the Query Editor window without
saving your input.
Table 10-2. Query Report Parameters
(continued)
Parameter Description