Owner's Manual

264 Configuring Protocols to Send Information to IT Assistant

Select

LAN Parameters

and press <Enter>.

• Provide a hexadecimal value for

RMCP+ Encryption Key

•Enable

LAN Alert

•Provide the

Alert Destination

. This is the IP address of the

management station to which you want to send alerts.

Press <Esc> to return to the Remote Access Configuration Utility.

Select

LAN User Configuration

and press <Enter>. Set this value to

Specify the user name and password.

This configures the managed system for IPMI discovery and configures the

BMC to send alerts to IT Assistant.

NOTE: When you configure IT Assistant to use the IPMI parameters of the BMC of

your managed systems, ensure that the BMC user name, password, and the kg key

values in the managed system must match those on the management station.