Owner's Manual

116 Configuring Dell OpenManage IT Assistant to Monitor Your Systems
•In Domain\User Name , Tom enters the same name that he used to
configure CIM on the managed system. Also, ensure that CIM is
selected.
• Tom enters the same
Password that he used for the CIM password on
the managed system.
NOTE: For inband IPMI support enable CIM Discovery option from the wizard.
However, this is supported only on Dell PowerEdge xx8x and later systems
running Windows Server 2003 R2 or Windows Server 2008. For out-of-band
IPMI support on xx8x servers, enable IPMI from the wizard.
7 In step 5 of the wizard, Tom selects the Enable Dell/EMC Array
Discovery
.
In this screen, Tom gives the following details:
• Navisphere Username
• Navisphere Password
NOTE: You can use this field only if you have Dell|EMC devices in the
discovery range.
8 In step 6 of the wizard, Tom configures the following IPMI parameters of
the BMC/iDRAC of his managed systems.
•User name
•Password
•KG Key
NOTE: KG Key is applicable only on Dell PowerEdge x9xx and later systems,
which support IPMI version 2.0. By default, KG Key is disabled on the
BMC/iDRAC.
NOTE: If you have Dell PowerEdge x8xx and later systems on your network
and you enable the KG Key on, for example, Dell x9xx systems, you must
specify two separate ranges to discover these systems.
Since Tom has new uninstrumented (without any Dell agent installed)
Dell
x9xx systems, he can discover these systems using IPMI discovery.
For more information, see "Using IPMI Discovery in Tom’s Enterprise-
Size Business."
9 In step 7 of the wizard, Tom can choose what action IT Assistant will take
upon completion of the wizard.