Owner's Manual

108 Configuring Dell OpenManage IT Assistant to Monitor Your Systems
Configuring SNMP on Each Managed System
Before configuring discovery, Tom needs to determine the Get and Set
community names he wants to use for his network, and install and configure
the SNMP agent and operating system SNMP service of each server he wants
to manage.
Table 6-2 provides information about the remote systems that Tom is
monitoring.
Table 6-2. Example Subnet Ranges, IP Addresses, or Host Names and Corresponding
Information for Data Center and Remote Servers
System
Group Name
Include Subnet
Range
Exclude Hosts or
Subnet Range
Read-Only/Read-
Write Community
Names
Number
of
Devices
on
Subnet
Longest Ping
Response
Time
Observed on
Subnet
(milliseconds)
Data Center
Servers 1
192.166.153.* 192.166.153.2 dcp123/dcsecure01 100 64
Data Center
Servers 2
192.166.154.* examplehost dcp123/dcsecure01 100 128
Data Center
Servers 3
192.166.155.* 192.166.155.10-25 dcp123/dcxprivall 100 78
Data Center
Servers 4
192.166.156.* dcp123/dcxprivall 100 32
Data Center
Servers 5
192.166.157.* dcp123/dcxprivall 100 146
Data Center
Servers 6
192.166.158.* dcp123/dcxprivall 100 148
Data Center
Servers 7
192.166.159.* dcp123/dcxprivall 100 132
Data Center
Servers 8
192.166.160.* dcp123/dcxprivall 100 59
Data Center
Servers 9
192.166.161.* dcp123/dcxprivall 50 128
Remote
Servers 1
10.9.72.* dcp123/dcxprivre
m
50 5600