Owner's Manual

3. Click "Custom Level" button.
4. Go to "Security" -> "Active Scripting."
5. Select "Enable."
6. Close the browser and launch IT Assistant in a new browser
window. [189345]
* Software Deployment on a managed server running Linux operating
system with only Online Diagnostics tool installed will upgrade
only the components of the Online Diagnostics tool.
OpenManage Server Administrator components will not be installed.
Running the task again will install OpenManage Server
Administrator components [167175].
* IT Assistant Virtual Machine Report will provide information of
Guest Virtual Machines running on VMware ESX Servers only. This
will not report the information of Guest Virtual Machines running
on a Microsoft® Hyper-V Server or Microsoft® Windows Server 2008
Enterprise servers [230058].
* The IT Assistant alerts will not be processed for about an hour
if you upgrade to IT Assistant 8.6 on a management station running
on certain time zones such as "AUS Eastern Standard Time,"
"Tasmania Standard Time" and so on.
This will affect only those alerts that are:
1. already there in IT Assistant
2. received within an hour before upgrading to IT Assistant
8.6.[227869]
* Following issues will be seen when IT Assistant is upgraded to
IT Assistant 8.6 in AUS Eastern Standard Time (Canberra, Melbourne,
Sydney), Tasmania Standard Time (Hobart) and New Zealand Standard
Time (Auckland, Wellington) time zones.
1. Alert Logs: In DST period, an already existing alert will be
ignored from the same device for one hour.
2. Scheduled tasks: In DST period, all the:
• Hourly tasks (tasks scheduled to run every 'n' hours)
will skip the next schedule cycle.
• Periodic tasks (tasks scheduled to run every 'n' minutes)
will resume after one hour.
In non-DST period, all the hourly and periodic tasks run
immediately after upgrade and continue normal cycle.
To fix the issue in DST period, edit the tasks manually to start
them in the next schedule cycle.
To fix the issue in non-DST period, remove the tasks manually
before starting the upgrade. After upgrade, add the tasks
manually to start them in the next schedule cycle. [240902]
* If "Log On" account of "DSM IT Assistant Connection Service" or
"DSM IT Assistant Network Monitor" services are changed, the