Owner's Manual

3. Re-start the system.
4. Re-enable the Microsoft Windows BitLocker Drive Encryption
feature.
You can use IT Assistant to view the TPM information in the Device
Details page.
* You may not get appropriate privileges in the IT Assistant GUI if:
a) you are part of an Active Directory group, which is in turn part
of another group and
b) you launch Server Administrator using the desktop icon and
Single Sign-on is enabled. [167801].
* In the Online Repository Synchronization wizard, while testing
Internet connectivity, if the test passes, IT Assistant may use the
same Internet Connection settings and continue to report further
tests as successful even if you provide different proxy settings.
This issue can be overcome by restarting the DSM IT Assistant
Connection Service. [174323]
* If the CPU throttles, the following message in the Hardware System
Event Log (SEL) will be displayed with an unknown severity:
System Board Power Optimized: Performance status sensor for System
Board, unknown event.
This would be displayed in the "Hardware Logs" tab when you select
the system in the Devices view.[175331]
* SNMP connectivity from IT Assistant may fail if the SNMP ports on
the management station and managed system are different. If some
management applications change the default SNMP port, it could lead
to SNMP connectivity failure from IT Assistant.[175442]
* Server Administrator Deployment task requires dependent components
(example libc++) to be installed on the target systems running the
Linux operating system. If these components are not installed, the
task will fail with the following error message:
"omexec must be installed on the remote node for the task. See the
help and ensure remote node requirements are met before executing
the task." [175296]
* When IT Assistant is launched using the Internet Explorer 7
browser, it may present a page displaying "Certificate Error."
On clicking "Continue to this website (not recommended)," it may
fail to load the application and redirect to the
"res://ieframe.dll" page.
To work around this problem, enable "Active Scripting" in the
"Internet" security zone. Perform the below steps to do this:
In Internet Explorer,
1. Go to "Tools"-> "Internet Options"-> "Security."
2. Select "Internet" zone.