Owner's Manual

on the Management Station. [79768]
* It is not recommended to provide an IP address in multiple ranges,
especially when you are using the IPMI Protocol. This could result
in duplicate devices being displayed on the device tree. [78710]
* For discovering systems running SUSE(R) Linux Enterprise Server
and using SNMP, add the following to the snmpd.conf:
------------------
com2sec mynetwork 192.168.1.0/24 public
group MyRWGroup v1 mynetwork
view all included .1 80
access MyRWGroup "" any noauth exact all all none
---------------
Ensure that you retain the trapsink and the smuxpeer lines in the
existing conf file. You can delete all other content. In the line
containing "com2sec mynetwork...," substitute the existing address
with the subnet address your management station is on. For example,
if the IT Assistant system has an IP address of 143.166.29.117,
then substitute it with 143.166.29.0. Make sure to retain "/24."
Restart /etc/init.d/snmpd. [81249]
* For IPMI-based discovery or inventory, the maximum length for the
host operating system name is 62 characters. Any character beyond
that limit will be truncated. [91210]
* Initialization of ML6000 may take a few minutes to give accurate
information on the slot count/drive count on IT Assistant.[66838]
* You may experience problems while performing resource-intensive
operations in IT Assistant if you keep the same browser session
open for a couple of days. These operations include working with
Software Deployment tasks and Performance and Power Monitoring
features. To recover, close the browser and launch IT Assistant
in a new browser window. [156726]
* A first-time catalog update on the Online Repository
Synchronization Wizard, may not populate the tree. To workaround
this issue close and re-run the wizard.[162862]
* If IT Assistant is running on a Windows Vista system, a first-time
Catalog update on the Online Repository Synchronization Wizard may
cause the session to expire. If the session expires, close the
browser and launch IT Assistant in a new browser window [162315].
* On Vista and later operating systems, the Microsoft telnet client
may not be installed by default. Due to this, IT Assistant may
not show application launch point for SOL Proxy and telnet.
Microsoft Telnet Client must be installed on the system where
the IT Assistant UI is running. [157301]
* If you set the task start or end time to a time in Daylight Saving
Time (DST) shift period, IT Assistant will change the task start
or end time to the closest valid time. A workaround to eliminate
the changing of start or end time is to set a valid start/end
time. [165393]