Users Guide

• CPUs

• Memory

• Storage Controllers

• Storage Enclosures

• Physical Disks

• iDRAC

• Power Supplies

• Fans

• Voltages

• Temperatures

The health statuses are represented by using a doughnut chart. You can select different sections in the doughnut chart to filter the health

status of the components. For example, when you select the red section, components with critical health status are only displayed.

NOTE: For software storage controllers and physical disks attached to embedded SATA controller, the health inventory

status will always be displayed as "Unknown".

Hardware inventory—Supported server

components

Hardware inventory of the following server components are displayed:

• System

• Firmware

• CPUs

• Memory

• Storage Controllers

• Storage Enclosures

• Network Devices

• Physical Disks

• Power Supplies

• Fans

To view iDRAC details of target node, see View iDRAC details of the PowerEdge servers and nodes of HCI and Failover clusters.

NOTE:

Under Hardware Inventory, the attribute values of a few server components are displayed as blank because the

value might not be available in the server.

NOTE: Under Firmware inventory, for few network devices with multiple ports, since the applicable firmware version is

same for all ports, only a single port with the firmware version will be displayed.

NOTE: Information of few attributes of storage enclosures, firmware inventory, and memory component might not be

available for:

• YX2X and YX3X models of PowerEdge servers.

• YX4X models of PowerEdge servers with iDRAC version lesser than 3.30.30.30.

Manage Dell EMC PowerEdge Servers 9