Release Notes

Instructions for installing Dell EMC
OpenManage Integration with Microsoft
Windows Admin Center
Topics:
• Installation process
• Download Dell EMC OpenManage Integration with Microsoft Windows Admin Center
Installation process
OMIMSWAC can be installed in one of the following ways:
• By using the NuGet feed
• By using local path or network file share with the downloaded
Dell_EMC_OpenManage_Integration_MS_WAC_<Version><Build_Number>zip file from the Dell EMC Support Site. For
more information about downloading the .zip file, see the Download Dell EMC OpenManage Integration with Microsoft Windows
Admin Center section.
For more information about installing OMIMSWAC, see the Dell EMC OpenManage Integration with Microsoft Windows Admin Center
Installation Guide at Dell.com/OpenManageManuals.
NOTE:
If you are installing Dell EMC OpenManage Integration with Windows Admin Center extension by using the
Custom Feed option, see the Microsoft documentation to set up a custom feed or share.
After installing OMIMSWAC, ensure the following are enabled or available on the target node:
• The Redfish service is enabled.
• An iDRAC user slot is available.
• SMB port 445 is open. For more information, see https://go.microsoft.com/fwlink/?linkid=2101556.
• For management of PowerEdge servers, OMIMSWAC uses an internal OS to iDRAC Pass-through interface. By default, iDRAC is
reachable by using the IP address 169.254.0.1/<Subnet> or 169.254.1.1/<Subnet>. However, if the host has another network interface
in the same subnet (For example, when tool like VMFleet is installed), OMIMSWAC might not be able to communicate to the iDRAC
from the host OS. To resolve the conflict, log in to iDRAC and change the USB NIC IP address under the OS to iDRAC passthrough
section. For more information about assigning this IP address, see the iDRAC documentation on the Dell EMC support site.
• Ensure that the target node is not booted to Lifecycle Controller.
• Target node is not in the reboot state, or is powered-off.
• The USB NIC adapter is not disabled on the target node OS.
• Set the PowerShell execution policy to RemoteSigned on the system with Windows Admin Center installed and on the target node OS.
For more information, see https://www.dell.com/support/article/sln318718/dell-emc-openmanage-integration-with-microsoft-
windows-admin-center-omimswac-fails-to-query-host-information.
Download Dell EMC OpenManage Integration with
Microsoft Windows Admin Center
1. Go to Dell.com/support.
2. Perform one of the following actions:
a. Enter the Service Tag of your PowerEdge server, and then select Search.
b. Select Browse all products > Servers > PowerEdge, and then select the appropriate model of your PowerEdge server.
3. On the support page of your server, select DRIVERS & DOWNLOADS.
4. From the Category list, select Systems Management.
7
Instructions for installing Dell EMC OpenManage Integration with Microsoft Windows Admin Center 13