Users Guide
Table Of Contents
- Dell EMC OpenManage Integration Version 2.0 with Microsoft Windows Admin Center User’s Guide
- Contents
- Overview of OpenManage Integration with Microsoft Windows Admin Center
- Getting started with OpenManage Integration with Microsoft Windows Admin Center
- Ports required by Dell EMC OpenManage Integration with Microsoft Windows Admin Center
- Manage Dell EMC PowerEdge Servers
- Manage Failover clusters, Azure Stack HCI, and Windows Server HCI clusters
- View iDRAC details of the PowerEdge servers and nodes of HCI and Failover clusters
- Update PowerEdge servers and nodes of Windows Server HCI, Azure Stack HCI, and Failover clusters using OpenManage Integration extension
- Integrated deploy and update of Azure Stack HCI clusters
- Full Stack Cluster-Aware Updating for Azure Stack HCI clusters using OpenManage Integration snap-in
- Troubleshooting
- Identifying the generation of your Dell EMC PowerEdge server
- Contacting Dell EMC
- Glossary
- Appendix
Node 1 Node 2 Node 3 Node 4 Node 5
NVMe+SSD NVMe+HDD SSD+HDD All NVMe All SSD
Not supported: at least minimum number of drives
If two media types exist:
Node 1 Node 2 Node 3
2 × SSD for cache 2 × SSD for cache 2 × SSD for cache
3 × HDD for capacity 3 × HDD for capacity 3 × HDD for capacity
This is not supported. Nodes with two media types drives should have 2 SSD drives for cache and 4 HDD drives for capacity.
Supported: at least minimum number of drives
If two media types exist, supported configurations are:
Node 1 Node 2 Node 3
2 × SSD for cache 2 × SSD for cache 2 × SSD for cache
4 × HDD for capacity 4 × HDD for capacity 4 × HDD for capacity
This is supported. Nodes with two media types drives should have 2 cache drives (SSD/NVMe/AEP) and 4 capacity drives
(HDD/SSD/NVMe).
Not supported: drives with different bus protocol
The first two nodes use SSD drive with SAS bus protocol but the third node uses SSD drive with SATA bus protocol.
Node 1
Node 2 Node 3
SSD with SAS protocol SSD with SAS protocol SSD with SATA protocol
The first two nodes use SSD and HDD drives with SAS bus protocol but the third node uses HDD drive with SATA bus protocol.
Node 1
Node 2 Node 3
SSD with SAS protocol HDD with SAS protocol HDD with SATA protocol
These are not supported. Drives across nodes should have the same bus protocol for symmetrical configuration.
Not supported: drives with same capacity and different count
The first two nodes use 2TB SSD and the last node uses 3TB SSD. Every node has total 4 SSD.
Node 1
Node 2 Node 3
4 × 2 TB SSD 4 × 2 TB SSD 4 × 3 TB SSD
This is not supported. All drives of each media type (SSD/NVMe/HDD) should be of the same count and capacity.
Not supported: at least one same RDMA network adapter present in all nodes
The first two nodes use Qlogic network adapter and the last node uses Mellanox network adapter.
Node 1
Node 2 Node 3
Qlogic network adapter Qlogic network adapter Mellanox network adapter
This is not supported. One network adapters should be common across all nodes.
32
Integrated deploy and update of Azure Stack HCI clusters