Install Guide

Install Dell EMC OpenManage Integration with
Microsoft Windows Admin Center by using the official
Microsoft NuGet feed
Prerequisites
Before you install Dell EMC OpenManage Integration extension in Windows Admin Center by using the NuGet feed, ensure that
you have:
● Installed the Windows Admin Center 2103.2 GA.
● Logged in to Windows Admin Center as a gateway administrator.
To install Dell EMC OpenManage Integration extension by using the NuGet feed:
Steps
1. In the Windows Admin Center application, in the upper right corner, select Settings.
2. Under GATEWAY, click Extensions.
In the Available extensions tab, the Dell EMC OpenManage Integration extension is listed.
3. Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to
install the extension.
Results
After the Dell EMC OpenManage Integration extension is installed, Windows Admin Center is restarted, and the extension is
listed under Installed extensions.
Install Dell EMC OpenManage Integration with
Microsoft Windows Admin Center by using local path
or network file share
Prerequisites
Before you install Dell EMC OpenManage Integration extension in Windows Admin Center by using a local path or a network file
share, ensure that you have:
● Installed the Windows Admin Center 2103.2 GA.
● Logged in to Windows Admin Center as a gateway administrator.
● Downloaded and extracted the OpenManage Integration with Microsoft Windows Admin Center .zip file from the Dell EMC
support site.
To install Dell EMC OpenManage Integration extension by using a local or network file share:
Steps
1. In the Windows Admin Center application, in the upper right corner, select Settings.
2. Under GATEWAY, click Extensions.
3. Select Feeds > Add.
4. In the Add package source window, enter the local path or network file share where you have extracted the .zip file.
Example paths: C:\<foldername>, \\sharename\foldername.
NOTE:
● Make sure the .nupkg file name is dell-emc.openmanage-integration.<Version>.nupkg while adding the
OMIMSWAC extension.
● You must set read and write permissions to the local or network file location.
12 Installing Dell EMC OpenManage Integration with Microsoft Windows Admin Center