Dell EMC OpenManage Integration Version 2.0 with Microsoft Windows Admin Center Installation Guide March 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview of OpenManage Integration with Microsoft Windows Admin Center.............. 4 Revision history....................................................................................................................................................................5 What is new in this release................................................................................................................................................
1 Overview of OpenManage Integration with Microsoft Windows Admin Center Dell EMC OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) enables IT administrators to manage PowerEdge servers as hosts, Microsoft Failover Clusters created with PowerEdge servers, and Hyper-Converged Infrastructure (HCI) created by using Dell EMC HCI Solutions for Microsoft Windows Server or Dell EMC Integrated System for Microsoft Azure Stack HCI.
Topics: • • Revision history What is new in this release Revision history Date Document revision Description of changes February 2021 A00 Initial release for OMIMSWAC 2.0 March 2021 A01 ● Added support for Windows Admin Center 2103 GA. What is new in this release ● Supports Microsoft Windows Admin Center Preview 2103 GA. Dell EMC OpenManage Integration extension version 2.0 will only be supported with Windows Admin Center 2103 GA for monitoring and management of servers and clusters.
○ Improvements in compliance generation and update performance. ● Fixes: ○ Previously, if a target node/cluster was connected (using Single Sign-on authentication) without using "Manage as" credentials, to generate a compliance, it was required to reconnect the target node/cluster from the "All connections" page in the Windows Admin Center using "Manage as" credentials.
2 OpenManage Integration with Microsoft Windows Admin Center Licensing This section provides licensing guidance for OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC). Overview Installing and using OMIMSWAC Base version does not require any license and can be downloaded from the NuGet feed of Microsoft Windows Admin Center or Dell support site.
OMIWAC Premium License for PowerEdge. All base features along with premium management features. Perpetual iDRAC based license. OMIWAC Premium License for MSFT HCI Solutions. All base features along with premium management features. Perpetual iDRAC based license. This is also shown as "OMIWAC Premium License for Azure Stack HCI" in iDRAC. NOTE: The OMIWAC Premium License is not required to update individual target node.
3 Compatibility matrix The following table lists the supported Microsoft Windows Admin Center version, browser, operating system, supported software, and supported hardware. Table 1. Compatibility matrix (continued) Supported software and hardware Version Microsoft Windows Admin Center Windows Admin Center 2103 GA.
Table 1. Compatibility matrix Supported software and hardware Version ○ In YX2X and YX3X models of PowerEdge servers, following features are not available: ￭ Cluster-Aware Updating ￭ Health and Inventory information of Accelerators ● YX4X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.30.30.30 or later). ● YX5X models of PowerEdge servers with iDRAC9 (Recommended firmware version of 3.40.40.40 or later). ● PowerEdge XE2420 Edge server (Recommended iDRAC firmware 4.00.129.
4 Installing Dell EMC OpenManage Integration with Microsoft Windows Admin Center The Dell EMC OpenManage Integration with Microsoft Windows Admin Center can be installed in one of the following methods: ● By using the Microsoft's public Windows Admin Center NuGet feed. See Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the official Microsoft NuGet feed on page 12. ● By using a local path or a network share as package source for installation.
Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the official Microsoft NuGet feed Prerequisites Before you install Dell EMC OpenManage Integration extension in Windows Admin Center by using the NuGet feed, ensure that you have: ● Installed the Windows Admin Center 2103 GA. ● Logged in to Windows Admin Center as a gateway administrator. To install Dell EMC OpenManage Integration extension by using the NuGet feed: Steps 1.
5. Click Add. If the extension is successfully added, the extension is listed under the Available Extensions tab. 6. Select Dell EMC OpenManage Integration extension, click Install, and then click Confirm to confirm the changes and to install the extension. Results After the Dell EMC OpenManage Integration extension is installed, Windows Admin Center is restarted, and the extension is listed under Installed extensions.
Next steps After the OMIMSWAC extension version 2.0 is installed, while deploying or updating an Azure Stack HCI cluster, select Get updates in the Install hardware updates page or Hardware updates page respectively to continue to update the target nodes or cluster by using OpenManage Integration snap-in.
5 Upgrading OpenManage Integration with Microsoft Windows Admin Center Before you upgrade to OMIMSWAC version 2.0, ensure that you have installed the Windows Admin Center 2103 GA. You can upgrade the OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) extension by using one of the following methods: ● By using the official Microsoft Nuget feed. ● By using a local path or network file share with the downloaded .zip file from Dell EMC Support Site. NOTE: Upgrading to OMIMSWAC version 2.
Results After the Dell EMC OpenManage Integration extension is updated to a newer version, the Microsoft Windows Admin Center is restarted. Upgrade Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using local path or network file share Prerequisites Before you upgrade the Dell EMC OpenManage Integration extension in Windows Admin Center by using a local path or a network file share, ensure that you have: ● Installed the Windows Admin Center 2103 GA.
6 Launching OpenManage Integration with Microsoft Windows Admin Center Before you launch Dell EMC OpenManage Integration extension in Windows Admin Center, ensure that you have: ● Logged in to Windows Admin Center as a gateway administrator. After installing the OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC), perform the following actions to launch the extension: 1. In the upper left corner of Windows Admin Center, select Server Manager or Cluster Manager from the drop-down menu.
7 Uninstall Dell EMC OpenManage Integration with Microsoft Windows Admin Center Steps 1. In the Windows Admin Center application, in the upper right corner, select Settings. 2. Under GATEWAY, click Extensions. 3. In the Installed extensions tab, select the Dell EMC OpenManage Integration integration, and then click Uninstall. 4. Click Confirm to proceed with the uninstallation of the extension.
8 Identifying the generation of your Dell EMC PowerEdge server To cover a range of server models, the PowerEdge servers are now be referred to using the generic naming convention and not their generation. This topic explains how to identify the generation of a PowerEdge server that are referred to using the generic naming convention. Example: The R740 server model is a rack, two processor system from the 14th generation of servers with Intel processors.
9 Additional resources Table 3. Additional resources Document Description Availability Dell EMC OpenManage Integration with Microsoft Windows Admin Center User's Guide Provides information about using OpenManage Integration with Microsoft Windows Admin Center. Dell EMC OpenManage Integration with Microsoft Windows Admin Center Release Notes Provides information about new features, known issues and workarounds in OpenManage Integration with Microsoft Windows Admin Center. 1. Go to Dell.
10 Contacting Dell EMC About this task Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell EMC product catalog. To contact Dell EMC for sales, technical support, or customer service issues: Steps 1. Go to Dell.com/support. 2.
