Dell EMC OpenManage Integration Version 1.1.1 with Microsoft Windows Admin Center Release Notes January 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Release summary..........................................................................................................4 Version....................................................................................................................................................................................4 Previous version.............................................................................................................................................................
1 Release summary Dell EMC OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) enables IT administrators to manage the Dell EMC PowerEdge servers as hosts, Microsoft Failover Clusters created with PowerEdge servers, and Hyper-Converged Infrastructure (HCI) created by using the Dell EMC Solutions for Microsoft Azure Stack HCI. OMIMSWAC simplifies the tasks of IT administrators by remotely managing the PowerEdge servers and clusters throughout their life cycle.
2 Compatibility Table 1. Compatibility matrix Supported software and hardware Version Microsoft Windows Admin Center 1910.2 GA, 2007 GA, and 2009 GA release. For more information, see the Microsoft Windows Admin Center documentation at https:// www.microsoft.com/en-us/cloud-platform/windows-admin-center.
Table 1. Compatibility matrix (continued) Supported software and hardware Version Supported Storage Spaces Direct Ready Nodes as target nodes R440, R640, R740xd, and R740xd2 Dell EMC Solutions for Microsoft Azure Stack HCI. NOTE: Target nodes running Windows Server Core operating system are not supported by Dell EMC OpenManage Integration.
3 Key features ● OMIMSWAC provides a simplified solution to IT administrators to efficiently manage the following: ○ Dell EMC PowerEdge servers running on supported Windows Operating Systems. ○ Azure Stack HCI clusters based on AX nodes or Storage Spaces Direct Ready Nodes from Dell EMC. ○ Microsoft failover clusters created with Dell EMC PowerEdge servers. ● View overall Health, Hardware inventory, and iDRAC inventory of nodes including component-level information of all supported Dell EMC platforms.
4 New in this release Release 1.1.1 ● Support for Microsoft Windows Admin Center version 2007 GA and 2009 GA. ● Support for PowerEdge XE2420 Edge server with iDRAC firmware 4.00.129.00 or later. ● Fixes: ○ Issue with accessing OMIMSWAC using WAC gateway user credentials. ○ Issue with retrieving inventory information for clusters connected using Single-Sign-on. ○ Issue with generating compliance report for target nodes or clusters connected using a password that contains certain special characters.
5 Fixed issues Release 1.1.1 Issue 1 Description When you log in to Windows Admin Center (WAC) using gateway user credentials without admin privileges and try to launch OpenManage Integration from the WAC console, access denied error may appear. Issue 2 Description When a cluster is connected by using Single Sign-on authentication, OMIMSWAC is unable to retrieve the inventory information and the Windows Admin Center might be unresponsive.
6 Known issues Issue 1 Description Unable to retrieve the health and hardware inventory from the target iDRAC. Workaround Ensure that the following are enabled or available on the target node: ● The Redfish service is enabled. ● An iDRAC user slot is available. ● The SMB port 445 is open. ● For management of PowerEdge servers, ensure that OMIMSWAC uses an internal OS to iDRAC Pass-through interface. By default, iDRAC will be reachable using the IP address 169.254.0.1/ or 169.254.1.1/.
While installing OMIMSWAC by using local path or network path, multiple instances of OMIMSWAC extension may be listed under Available and Installed Extensions when more than one .nupkg package is available in the specified folder path, or the .nupkg packages are available in root or subfolders in addition to the folder path provided under Feeds > Add package source. Workaround Ensure that a single .nupkg package is available in the root or subfolders under Feeds > Add package source.
7 Instructions for installing Dell EMC OpenManage Integration with Microsoft Windows Admin Center Topics: • • Installation process Download Dell EMC OpenManage Integration with Microsoft Windows Admin Center Installation process OMIMSWAC can be installed in one of the following ways: ● By using the NuGet feed ● By using local path or network file share with the downloaded Dell_EMC_OpenManage_Integration_MS_WAC_zip file from the Dell EMC Support Site.
3. On the support page of your server, select DRIVERS & DOWNLOADS. 4. From the Category list, select Systems Management. 5. Select the supported version of OpenManage Integration with Microsoft Windows Admin Center, and then click Download. The downloaded Dell_EMC_OpenManage_Integration_MS_WAC_..zip file contains the .nupkg file which is used to install OMIMSWAC integrator in Windows Admin Center by using a local path or network share. NOTE: Do not rename the .
8 Instructions for upgrading Dell EMC OpenManage Integration with Microsoft Windows Admin Center OMIMSWAC can be upgraded in one of the following ways: ● By using the NuGet feed ● By using local path or network file share with the downloaded Dell_EMC_OpenManage_Integration_MS_WAC_..zip file from the Dell EMC Support Site. For more information about downloading the .zip file, see the Download Dell EMC OpenManage Integration with Microsoft Windows Admin Center section.
9 Identifying the generation of your Dell EMC PowerEdge server To cover a range of server models, the PowerEdge servers are now be referred to using the generic naming convention and not their generation. This topic explains how to identify the generation of a PowerEdge server that are referred to using the generic naming convention. Example: The R740 server model is a rack, two processor system from the 14th generation of servers with Intel processors.
10 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell EMC product catalog. To contact Dell EMC for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2.
A Open source licenses A portion of this software consists of open source software, which you can use under the terms and conditions of the specific license under which the open source software is distributed. Under certain open source software licenses, you are also entitled to obtain the corresponding source files. You may find corresponding source files for this program at http:// opensource.dell.com/.
Curl and libcurl are true Open Source/Free Software and meet all definitions as such. It means that you are free to modify and redistribute all contents of the curl distributed archives. You may also freely use curl and libcurl in your commercial projects. Curl and libcurl are licensed under the license below, which is inspired by MIT/X, but not identical. There are other computer-related projects using the name curl as well. For details, check out our position on the curl name issue.
