Dell EMC OpenManage Integration Version 1.1.1 with Microsoft Windows Admin Center Installation Guide August 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview of OpenManage Integration with Microsoft Windows Admin Center...................... 4 New in this release.................................................................................................................................................................4 Chapter 2: OpenManage Integration with Microsoft Windows Admin Center Licensing......................... 6 Chapter 3: Compatibility matrix.............................................................................
1 Overview of OpenManage Integration with Microsoft Windows Admin Center Dell EMC OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) enables IT administrators to manage the PowerEdge servers as hosts, Microsoft Failover Clusters created with PowerEdge servers, and Hyper-Converged Infrastructure (HCI) created by using the Dell EMC Solutions for Microsoft Azure Stack HCI.
• In previous release, compliance generation failed when a server or cluster was connected using a password that contains special characters such as double-quote ("), grave accent (`), and semi-colon (;). Reset of CauClusterRole parameter to allow the self-updating functionality of the specified cluster after the Cluster-Aware Updating (CAU) operation is complete. Release 1.1.
2 OpenManage Integration with Microsoft Windows Admin Center Licensing This section provides licensing guidance for OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC). Overview Installing and using OMIMSWAC Base version does not require any license and can be downloaded from the NuGet feed of Microsoft Windows Admin Center or Dell support site.
3 Compatibility matrix Table 1. Compatibility matrix Supported software and hardware Version Microsoft Windows Admin Center 1910.2 GA and 2007 GA release. For more information, see the Microsoft Windows Admin Center documentation at https://www.microsoft.com/en-us/cloudplatform/windows-admin-center.
Table 1. Compatibility matrix (continued) Supported software and hardware Version Supported Storage Spaces Direct Ready Nodes as target nodes R440 ,R640,R740xd and R740xd2 Dell EMC Solutions for Microsoft Azure Stack HCI.
4 Installing Dell EMC OpenManage Integration with Microsoft Windows Admin Center The Dell EMC OpenManage Integration with Microsoft Windows Admin Center can be installed in one of the following methods: • • By using the NuGet feed of Microsoft Windows Admin Center. See Install Dell EMC OpenManage Integration with Microsoft Windows Admin Center by using the official Microsoft NuGet feed on page 9. By using a local path or a network share as package source for installation.
The downloaded Dell_EMC_OpenManage_Integration_MS_WAC_..zip file contains the .nupkg file which is used to install OMIMSWAC integrator in Windows Admin Center by using a local path or network share. NOTE: Do not rename the .nupkg file while installing the OMIMSWAC extension.
5 Upgrading OpenManage Integration with Microsoft Windows Admin Center You can upgrade the OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC) extension by using one of the following methods: • • By using the official Microsoft Nuget feed. By using a local path or network file share with the downloaded .zip file from Dell EMC Support Site. NOTE: OMIMSWAC version 1.1.1 can be upgraded from version 1.0.1 and 1.1.0.
NOTE: Do not rename the .nupkg file in the extracted folder. NOTE: You must set read and write permissions to the local or network file location. 6. After the extension is successfully added, the latest version of the extension is listed under the Available Extensions tab. To upgrade, click Install. After the Dell EMC OpenManage Integration extension is upgraded, Windows Admin Center is restarted, and the extension is listed under Installed extensions.
6 Launching OpenManage Integration with Microsoft Windows Admin Center Before you launch Dell EMC OpenManage Integration extension in Windows Admin Center, ensure that you have: • Logged in to Windows Admin Center as a gateway administrator. After installing the OpenManage Integration with Microsoft Windows Admin Center (OMIMSWAC), perform the following actions to launch the extension: 1. In the upper left corner of Windows Admin Center, select: • For 1910.
7 Uninstall Dell EMC OpenManage Integration with Microsoft Windows Admin Center 1. In the Windows Admin Center application, in the upper right corner, select Settings. 2. Under GATEWAY, click Extensions. 3. In the Installed extensions tab, select the Dell EMC OpenManage Integration integration, and then click Uninstall. 4. Click Confirm to proceed with the uninstallation of the extension.
8 Identifying the generation of your Dell EMC PowerEdge server To cover a range of server models, the PowerEdge servers are now be referred to using the generic naming convention and not their generation. This topic explains how to identify the generation of a PowerEdge server that are referred to using the generic naming convention. Example: The R740 server model is a rack, two processor system from the 14th generation of servers with Intel processors.
9 Additional resources Table 3. Additional resources Document Description Dell EMC OpenManage Provides information about using OpenManage Integration with Microsoft Integration with Microsoft Windows Admin Windows Admin Center User's Center. Guide Dell EMC OpenManage Integration with Microsoft Windows Admin Center Release Notes Provides information about new features, known issues and workarounds in OpenManage Integration with Microsoft Windows Admin Center.
10 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell EMC product catalog. To contact Dell EMC for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2.
