Users Guide

Appendix 2
Populating Pool value CSV file
Table 7. Pool value file
serviceTag(auto
populated)
FQDD(auto populated) poolAttributeName poolAtrributeValue
Service Tag of the
device(s) from which the
system specific attributes
are exported
Identifies the component associated to
the system specific attribute
Identifies the system specific
attribute to be configured
Set the value for the
specified system specific
attribute
To populate Pool Value file for operating system component in SCVMM to be configured and deployed with Static IP, see example -
serviceTag(
auto
populated)
FQDD(auto
populated)
poolAttributeNam
e
poolAtrributeValue Details on what is the attribute and how to
populate
xxxxxxx WINDOWS HOSTNAME WIN19SRVDTA What : this is the hostname to be set on
deployed \ provisioned server.
xxxxxxx WINDOWS ServerMngNIC <MAC Adresses>
What : This is the MAC Address of the network
port which can communicate to System Center
and OMMISSC Appliance.
How : Retrieve the MAC Address from iDRAC
by navigating to specific port.
xxxxxxx WINDOWS LOGICALNETWORK OSD USING STATIC
IP
What : This is the Network Profile created in
SCVMM that carries static IP pool, subnet and
other network details to be applied on MN
How : Create the Logical Network Profile in
SCVMM and provide the created template
name. For more information, see Plan the VMM
networking fabric section of Microsoft
Documentation.
xxxxxxx WINDOWS IPSUBNET 100.100.28.0/22 What : This is the subnet mask for the static IP
pool input in above logical network profile.
xxxxxxx WINDOWS IPADDRESS 100.100.31.145 What : This is the static IP to be applied on
deployed \ provisioned managed node.
13
66 Appendix 2