Users Guide

latest version of the file, and do not use the Dell EMC OpenManage Deployment Toolkit Windows Driver Cabinet file for
the WinPE update.
1. Double-click the DTK executable file.
2. To unzip the DTK drivers, select a folder.
For example, C:\DTK501.
3. Copy the unzipped DTK folder to a share folder.
For example, \\Shareip\sharefolder\DTK\DTK501
NOTE: If you are upgrading from SCVMM SP1 to SCVMM R2, and then upgrade to Windows PowerShell 4.0. and
create a WinPE ISO image.
Updating WinPE image
A unique job name is assigned to each WinPE update job.
1. In OMIMSSC, select WinPE Update.
The WinPE Update page is displayed.
2. In Image Source, for Custom WinPE Image Path, enter the WinPE image path along with the file name where the image is present.
For example, \\Shareip\sharefolder\WIM\boot.wim.
3. Under DTK Path, for DTK Drivers Path, enter the location for the Dell EMC Deployment Toolkit drivers.
For example, \\Shareip\sharefolder\DTK\DTK501
4. Under Output File, for ISO or WIM File Name, enter a name for the file along with the shared file path where the WinPE image will
be generated.
Enter one of the output file types:
• WIM file for SCCM
• ISO file for SCVMM
NOTE: Shared folder must be in the system center machine.
5. Under Credential Profile, for Credential Profile, enter the credentials that have access to the share folder where the WinPE image
is saved.
6. (Optional) To view the job list, select Go to the Job List.
A unique job name is assigned to each Windows Preinstallation Environment (WinPE) update.
7. Click Update.
WinPE image with the file name that is provided in the preceding step is created under \\Shareip\sharefolder\WIM.
Preparing for operating system deployment on
SCCM console
Before deploying operating system on managed servers discovered using OMIMSSC in SCCM console, create a Dell EMC specific or a
custom task sequence, an LC boot media file, and task sequence media bootable ISO file.
Task sequence-SCCM
Task sequence is a series of commands that is used to deploy operating system on the managed system using SCCM.
Before creating Operational Template, Dell EMC recommends that you complete the following prerequisites.
• In Configuration Manager, ensure that the system is discovered and present under Assets and Compliance > Device Collections >
All Dell Lifecycle Controller Servers. For more information, see Discover servers.
• Install the latest BIOS version on the system.
• Install the latest version of Lifecycle Controller on the system.
• Install the latest version of iDRAC firmware on the system.
NOTE: Always launch the Configuration Manager console with administrator privileges.
Preparing for operating system deployment 27