Users Guide

• When you log in to OMIMSSC as a delegated admin, you can view all the host and unassigned servers that are not specific to this user.

Hence, ensure that you have the required privileges before performing any operations on the servers.

• If there are multiple Microsoft consoles enrolled in OMIMSSC, and then host servers are specific to the Microsoft console where they

are managed. And the unassigned servers are common to all consoles.

Launching Modular Systems view

The Modular Systems View page lists all the Modular Systems that are discovered in OMIMSSC.

View the CMC IP address, service tag, model, firmware version, template compliance status of Modular System for an assigned

Operational Template, number of servers, Input/Output (I/O) Modules, and storage devices present on that Modular System. Configure

the hardware and update Modular System firmware, by deploying the Operational Template.

You can perform the following tasks on Modular Systems View page:

• Discover Modular Systems using manual discovery

• Delete Modular System

• To view latest inventory information, refresh the page.

• Assign Operational Template for Modular System

• Deploy Operational Template for Modular System

• View I/O modules

• Launching I/O modules

To view Modular System discovered in OMIMSSC:

1. In OMIMSSC, click Configuration and Deployment, and then click Modular Systems View.

All the Modular Systems discovered model names are displayed.

2. To view a specific Modular System, click a model name under Modular Systems View.

All the Modular Systems of that model are displayed with their service tag.

3. To view all devices present in that Modular System, click service tag.

All the servers, Input Output modules, and storage devices along with their details are displayed.

NOTE:

Only after a deep discovery of a Modular System, all devices in the Modular System and their information are

displayed.

• By default the Servers tab is displayed.

All the servers that are discovered in this Modular System are displayed.

• To view all the Input Output Modules present in a Modular System, click I/O Modules tab.

• To view all the storage devices present in the Modular System, click Storage Devices tab.

After discovering Modular Systems, consider the following points:

• The Operational Template column is displayed as Not Assigned, after the Modular Systems are discovered. To update firmware

and deploy operating system on these Modular Systems, assign and deploy Operational Templates. For more information, see

Managing Operational Templates.

• View the count of Input/Output, storage devices, and servers present in Modular Systems after a shallow discovery. Perform a deep

discovery, to view more details about the components in a Modular System.

Launching OpenManage Enterprise Modular console

To launch OpenManage Enterprise Modular console, perform the following steps:

1. In OMIMSSC, expand Configuration and Deployment, and click Modular Systems.

2. Click Device IP of the Modular System.

Input/Output Modules

All the network Input/Output Modules along with their IP address, service tag, Input/Output type, model, firmware version and slot

information are displayed.

Launch I/O Modules console from Input/Output Modules page.

To view information about Input/Output Modules, perform the following steps:

Views in OMIMSSC