Users Guide

NOTE: Irrespective of the selection made in the check box against each component, all the configurations are captured
in the template.
In Operating System component, perform the steps in either of the following options, as per your requirement:
● For Windows operating system deployment on SCCM, see Windows component for the OMIMSSC console extension for
SCCM.
● For Windows operating system deployment on SCVMM, see Windows component for the OMIMSSC console extension
for SCVMM.
● OMIMSSC
● For non-Windows operating system deployment, see Non-Windows component for the OMIMSSC console extensions.
8. To save the profile, click Finish.
Installer folders
The following folders are created after installing the console extension:
● Log—this folder consists of console-related log information.
NOTE: If the credentials for domain administrator account and local administrator account are different, do not use domain
administrator account to log in to SCCM or SCVMM. Instead use a different domain user account to log in to SCCM or
SCVMM.
Assign Operational Templates
1. In OMIMSSC click Configuration and Deployment, and then click Server View. Select the required servers and click
Assign Operational Template and Run Compliance.
The Assign Operational Template and Run Compliance page is displayed.
2. Select the required servers and click Assign Operational Template and Run Compliance.
3. In OMIMSSC click Configuration and Deployment, and click Modular Systems View. Select the required Modular
System and click Assign Operational Template .
The Assign Operational Template page is displayed.
4. Select the required Modular Systems, and click Assign Operational Template and Run Compliance.
The Assign Operational Template page is displayed.
5. Select the template from Operational Template drop-down menu, enter a job name, and then click Assign.
The Operational Template drop-down lists templates, of the same type as that of the devices selected in the previous step.
If the device is compliant to the template, and then a green color box with a check mark is displayed.
If the Operational Template is not applied successfully on the device or the hardware component in Operational Template is
not selected, and then an information symbol box is displayed.
If the device is noncompliant to the template, and then a warning symbol box is displayed. Only if the device is noncompliant
to assigned Operational Template, you can view a summary report by clicking the template name link. The Operational
Template Compliance-Summary Report page displays a summary report of the differences between the template and
device.
To view a detailed report, perform the following steps:
a. Click View Detailed Compliance. Here, the components with attribute values different from those of the assigned
template are displayed. The colors indicate the different states of Operational Template compliance.
● Yellow color warning symbol—non-compliance. represents that the configuration of the device does not match with
the template values.
● Red color box—represents that the component is not present on the device.
Configuration and deployment
87