Dell EMC OpenManage Integration for Microsoft System Center Version 7.2.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2009 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: OpenManage Integration Version 7.2.1 for Microsoft System Center Release Notes..... 4 Release type and definition............................................................................................................................................... 4 Importance............................................................................................................................................................................ 5 Important Notes.................................
1 OpenManage Integration Version 7.2.1 for Microsoft System Center Release Notes This document describes the features, known issues, and resolutions in OpenManage Integration Version 7.2.1 for Microsoft System Center (OMIMSSC).
Importance URGENT: Dell EMC recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Important Notes ● The associated Dell EMC Deployment Tool Kit (DTK) v6.4 is made available for latest iDRAC9 x5 based PowerEdge Servers, to be used with the OMIMSSC Pack only. ● DTK is End of Life product from Dell EMC. This version of DTK is supported for use only with OMIMSSC version 7.2.
For detailed installation, pre-requisites, configuration, upgrade, and uninstallation instructions, see the Dell EMC OpenManage Integration for Microsoft System Center Version 7.2.1 for System Center Configuration Manager and System Center Virtual Machine Manager User's Guide at Dell.com/openmanagemanuals. Upgrade instructions Service Pack upgrade from previous versions of OMIMSSC to OMIMSSC version 7.2.1 is not available. ● You can upgrade to OMIMSSC version 7.2.
As a workaround, use different user names for the domain user and local user accounts, or use a single user account as local user and during Microsoft console enrollment in OMIMSSC Appliance. ● Issue 4 Description: When accessing the OMIMSSC admin portal by using Mozilla Firefox browser, you get the following warning message: “Secure Connection Failed”. Workaround: As a workaround, delete the certificate created from a previous entry of the admin portal in the browser.
Refer the dlciappliance_main log in OMIMSSC Admin portal, if the error message displayed is: Unix command failed SmbException: com.dell.pg.tetris.business.samba.smbclient.SmbException: session setup failed: NT_STATUS_IO_TIMEOUTwhere EnableSMB1Protocol = false. Workaround: As a workaround, see to the following KB article: support.microsoft.
After resetting Lifecycle Controller, if you still face the problem try the following alternative: ○ The antivirus or firewall may restrict the successful run of the WINRM command. See the following KB article for workaround: support.microsoft.com/kb/961804 ● Issue 15 Description: While adding servers to Active Directory, SCVMM error 21119 is displayed. Error 21119: The physical computer with did not join Active Directory in time.
● Issue 20 Description: After discovering the servers in OMIMSSC for SCCM console extension, the server may not get added into All Dell Lifecycle Controller Servers collection. Workaround: As a workaround, delete the All Dell Lifecycle Controller Servers collection and then discover the server. The collection is automatically created in SCCM and the server is added to this group.
○ Create a new Operational Template. ● Issue 26 Description: After the firmware update of PowerEdge MX7000 components, the comparison report under Available Updates in the Maintenance Center page, displays incorrect number of updates even if the firmware update is successful. Workaround: As a work-around, go to Maintenance Settings and click Test Connection of update source that is used while updating the firmware. Go to Maintenance Center to view the correct number of updates.
Workaround: As a workaround, after the CAU job is completed, restart the cluster node or nodes where AHCI controller is an applicable update and refresh the inventory. ● Issue 33 Description: In the Maintenance Center page, while performing Run Update using Cluster Aware Update method, user cannot update the firmware version of operating system driver pack.
As a workaround, do the following: 1. Delete the folder at default path: C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\AddInPipeline\AddIns\ 2. Restart SCVMM. 3. Remove the console extension, and then import the console extension as mentioned in Importing OMIMSSC console extension for SCVMM section of Dell EMC OpenManage Integration for Microsoft System Center for System Center Configuration Manager and System Center Virtual Machine Manager Installation Guide.
If you are accessing local FTP using proxy credentials that are created by CCProxy server, then the local FTP site is not accessible. ● Issue 3 Description: In BIOS Settings, the snoop mode attribute does not support ClusterOnDie option. ● Issue 4 Description: While creating a logical switch or a hypervisor profile and selecting host groups in OMIMSSC, the groups are not listed in nested form as present in SCVMM.
If user copies the already logged in Admin Portal page URL in to a new browser window, the browser does not redirect the user to the login page. Download instructions You can download an evaluation version of OMIMSSC from www.dell.com. However, to download a production version, contact your local Dell EMC Sales representative, purchase the appliance license, and then import to the required file location.
