Users Guide
Windows OS component for the OMIMSSC console
extension for SCCM
1 Select a task sequence and deployment method.
NOTE: Only the task sequences deployed on collections are listed in the drop-down menu.
For information about task sequence, see Task sequence-SCCM.
2 Select one of the following options for the Deployment method:
• Boot to network ISO—reboots specied ISO.
• Stage ISO to vFlash and Reboot—downloads the ISO to vFlash and reboots.
• Reboot to vFlash—reboots to vFlash. Ensure that the ISO is present in the vFlash.
NOTE: To use the Reboot to vFlash option, the label name of the partition that is created on vFlash must be
ISOIMG.
3 (Optional) To use the image present in the network share, select the Use Network ISO as Fallback option.
4 enter an LC boot media image le.
5 Select the drivers required for the operating system.
Windows component for the OMIMSSC console
extension for SCVMM
Select Hypervisor Prole, Credential Prole, and Server IP from.
NOTE
: Host Name, and Server Management NIC are always pool values.
If you select Server IP from as Static, and then ensure that you have congured the logical network in SCVMM, and the following
elds are pool values:
• Console Logical Network
• IP Subnet
• Static IP Address
Non-Windows component for the OMIMSSC console
extension for SCCM/SCVMM
About this task
Step
Select a non-windows operating system, operating system version, type of share folder, ISO le name, location of the ISO le and the
password for the root account of the operating system.
(Optional) Select a Windows type credential prole for accessing the CIFS share.
Host name is a pool value and if you disable DHCP option, and then the following elds are pool values:
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS
• Secondary DNS
66
Conguration and deployment