Install Guide
OMIMSSC 설치 및 구성
주제:
• 웹에서 OMIMSSC 다운로드
• Setting up OMIMSSC Appliance
• 여러 Microsoft 콘솔 등록
• OMIMSSC 관리 포털을 실행하여 OMIMSSC 구성 요소 다운로드
• OMIMSSC에 Microsoft 콘솔 등록
• 등록된 Microsoft 콘솔에서 OMIMSSC 실행
웹에서 OMIMSSC 다운로드
이 작업 정보
https://www.dell.com/support에서 OMIMSSC를 다운로드하려면 다음을 수행합니다.
단계
1 모든 제품 찾아보기 > 소프트웨어 > 엔터프라이즈 시스템 관리 > Microsoft 시스템용 OpenManage Integration을 클릭합니다.
2 필요한 OMIMSSC 버전을 선택합니다.
3 드라이버 및 다운로드 탭을 클릭합니다.
4 OMIMSSC vhd 파일을 다운로드합니다.
5 vhd 파일의 압축을 푼 다음 OMIMSSC 어플라이언스를 설정합니다.
Setting up OMIMSSC Appliance
Prerequisites
Ensure that the following requirements are met on the Hyper-V where you are setting up OMIMSSC Appliance:
• Virtual switch is congured and available.
• Allocate memory for OMIMSSC Appliance VM based on number of Microsoft consoles you plan to enroll. For more information, see the
Common requirements.
About this task
To set up OMIMSSC Appliance:
Steps
1 Deploy the OMIMSSC Appliance VM by performing the following steps:
a In Windows Server, in Hyper-V Manager, from the Actions menu, select New and click Virtual Machine Manager.
The New Virtual Machine Wizard is displayed.
b In Before You Begin, click Next.
c In Specify Name and Location, provide a name for the virtual machine.
If you want to store the VM in a dierent location, and then select Store the virtual machine in a dierent location, click
Browse, and traverse to the new location.
d In Specify Generation, select Generation 1, and then click Next.
e In Assign Memory, assign the memory capacity that is mentioned in the prerequisite.
f In Congure Networking, in Connection, select the network that you want to use, and then click Next.
g In Connect Virtual Hard Disk, select Use an existing virtual hard disk, traverse to the location where the
OMIMSSCOMIMSSC_v7.1.0_for_VMM_and_CongMgr VHD le is present, and select the le.
5
12 OMIMSSC 설치 및 구성