Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Integration Version 7.1.1 for Microsoft System Center
41424344454647484950
• Yellow color warning symbol—non-compliance. represents that the conguration of the device does not match with the
template values.
• Red color box—represents that the component is not present on the device.
Deploying Operational Template for Modular System
About this task
You can congure Modular System components, and update the Modular System rmware versions by deploying the assigned Operational
Template.
NOTE: In a Multi-Chassis Management (MCM), if lead chassis is congured with Propagation to member chassis, and then
conguring and updating lead chassis and member chassis from OMIMSSC will override the changes done through propagation.
Steps
1 In OMIMSSC, click Conguration and Deployment, and click Modular Systems View. Select the Modular System on which you have
assigned the template, and then click Deploy Operational Template.
The Deploy Operational Template page is displayed.
2 (Optional) To export all the attributes that are marked as pool values in the selected template to a .CSV le, click Export Pool
Attributes, else, go to step 4.
3 If you have exported the pool values, enter values for all the attributes that are marked as pool values in the .CSV le and save the le.
In
Attribute Value Pool, select this le to import it.
The format of a .CSV le is attribute-value-pool.csv
NOTE: Ensure that you select a .CSV le which has all proper attributes and the CMC IP or CMC credentials do not
change due to the template, since the job is not tracked by OMIMSSC after the CMC IP or CMC credentials changes.
4 Enter a unique job name, description for the job, and click Deploy.
NOTE
: There are no supported system-specic pool value attributes for Modular System. Hence, there are no pool
values to be exported.
To track this job, the Go to the Job List option is selected by default.
Unassigning Operational Template
1 In OMIMSSC, perform any one of the following tasks:
• Click Conguration and Deployment, and click Server View.
• Click Conguration and Deployment, and click Modular System View.
Select the required devices and click Assign Operational Template and Run Compliance.
The Assign Operational Template and Run Compliance page is displayed.
2 Select Unassign from Operational Template drop-down menu, and click Assign.
Operational Template is unassigned to selected devices.
44
Managing Operational Templates