Users Guide

• Stage ISO to vFlash and Reboot—downloads the ISO to vFlash and reboots.

• Reboot to vFlash—reboots to vFlash. Ensure that the ISO is present in the vFlash.

NOTE: To use the Reboot to vFlash option, the label name of the partition created on vFlash must be ISOIMG.

3 (Optional) to use the image present in the network share if the image present in vFlash is corrupt select the Use Network ISO as

Fallback option.

4 Provide an LC boot media image le, and (optional) use Enable LC Drivers Injection. For more information about creating LC boot

media image, see the Create LC boot media.

5 Select the drivers required for the OS.

Windows component for OMIMSSC console extension for SCVMM

About this task

While creating the Operational Template, perform the following steps for windows component:

Steps

Select Hypervisor Prole, Credential Prole, and Server IP from.

NOTE: Host Name, and Server Management NIC are always pool values.

If you select Server IP from as Static, then ensure that you have congured the logical network in SCVMM, and the following elds

are pool values:

• Console Logical Network

• IP Subnet

• Static IP Address

Non-Windows component for OMIMSSC console extensions

About this task

While creating Operational Template, perform the following steps for non-windows component:

Steps

Select a nonwindows OS, OS version, type of share folder, ISO le name, location of the ISO le and the password for the root

account of the OS.

(Optional) select a Windows type credential prole for accessing the CIFS share.

Host name is a pool value and if you disable DHCP option, then the following elds are pool values:

• IP Address

• Subnet Mask

• Default Gateway

• Primary DNS

• Secondary DNS

Operational Template