Users Guide

5. The following message is displayed:
If there are any processes running on this appliance they will be terminated by this
action. Are you sure you wish to do this?
6. Enter y to reboot or n to cancel. The appliance is rebooted.
Resetting The Virtual Appliance To Factory Settings
To reset the virtual appliance to factory settings:
1. In vSphere Web Client, in the Navigator, select vCenter.
2. In the Navigator, select the Virtual Machine that you want to manage.
3. Do one of the following:
● On the Object tab, select Action > Open Console.
● Right-click the virtual machine that you selected and select Open Console.
4. Use the arrow keys to select Reset this Virtual Appliance to Factory Settings and press <ENTER>.
5. The following notice is displayed:
This operation is completely Irreversible if you continue you will completely reset
*this* appliance to its original settings. All changes you have made to this
appliance will be Lost. Are you sure you wish to Reset this Appliance to Factory
Settings?
6. Enter y to reset or n to cancel. The appliance is reset to the original factory settings and all the others settings and saved
data will be lost.
NOTE:
When the virtual appliance is reset to factory settings, any updates made to the Network Configuration are
preserved; these settings are not reset.
Refreshing the Console View
To refresh the Console view, select Refresh and press <ENTER>.
Logging out from the console
To log out from the console, click Log out in the top right corner against your logged-in account.
Read-only User Role
There is an unprivileged user role called readonly with shell access for diagnostic purposes. The read-only user has limited
privileges to run the mount. The readonly user's password is set as readonly. The readonly user’s password has changed from
admin password (for OMIVV v1.0 to v3.2) for security purposes.
Upgrading OMIVV from existing version to current version
1. To open Administration Console, in the Help and Support tab of OpenManage Integration for VMware vCenter, click the
link under Administration Console or start a web browser and provide the https:\\<ApplianceIP|hostname> url.
2. In the Login dialog box, type the password.
3. In Administration Console, in the left pane, click APPLIANCE MANAGEMENT.
4. In the APPLIANCE MANAGEMENT page, depending on your network settings, enable proxy and provide proxy settings if
your network needs proxy.
5. To upgrade the OpenManage Integration plug in from an existing version to the current version, perform one of the following
steps:
44
Console Administration