Users Guide

5. The system is locked down and put into maintenance mode. When the update is complete, the Appliance page displays
showing the newly installed version.
Downloading the Troubleshooting Bundle
Use this information to assist in troubleshooting issues, or send to Technical Support.
1. Launch a web Browser then enter https://<ApplianceIPAddress>.
2. In the left pane, click APPLIANCE MANAGEMENT.
3. To generate the troubleshooting bundle dialog box, click Generate Troubleshooting Bundle.
4. Click the Download Troubleshooting Bundle link.
5. To exit, click Close.
Setting Up The HTTP Proxy
You can set up the HTTP proxy settings using the Administration Console.
1. In OpenManage Integration for VMware vCenter, under Administration Console, use the link to open the Administration
Console.
2. In the Login dialog box, type your password.
3. In the left pane, click APPLIANCE MANAGEMENT.
4. In the Appliance Management page, scroll down to the HTTP Proxy Settings, and then click Edit.
5. In the Edit page, do the following:
a. To enable the use of HTTP Proxy Settings, next to Use HTTP Proxy Settings, select Enable.
b. In the Proxy Server Address text box, enter the proxy server address.
c. In the Proxy Server Port text box, enter the proxy server port.
d. To use proxy credentials, next to Use Proxy Credentials, select Yes.
e. If you are using credentials, in the User Name text box, enter the user name.
f. In the Password text box, type the password.
6. Click Apply.
Setting Up the NTP Servers
Use the Network Time Protocol (NTP) to synchronize the virtual appliance clocks to that of a NTP server.
1. In OpenManage Integration for VMware vCenter, under Administration Console, use the link to open the Administration
Console.
2. In the Login dialog box, type your password.
3. In the left pane, click APPLIANCE MANAGEMENT.
4. Click Edit under NTP Settings.
5. Select the Enabled check box. Enter the host name or IP address for a Preferred and Secondary NTP Server and click
Apply.
6. To exit, click Cancel.
NOTE: It might take around 10 minutes for the virtual appliance clocks to synchronize with the NTP server.
Generating a Certificate Signing Request
NOTE:
You must upload the certificate before registering the OpenManage Integration for VMware vCenter with the
vCenter.
Generating a new Certificate Signing Request prevents certificates that are created with the previously generated CSR from
being uploaded to the appliance.
1. In OpenManage Integration for VMware vCenter, under Administration Console, use the link to open the Administration
Console.
Console Administration
39