OpenManage Integration for VMware vCenter Version 3.1 Compatibility Matrix April 2016 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents Chapter 1: Overview...................................................................................................................... 4 Space required for provisioned storage......................................................................................................................... 4 Default virtual appliance configuration...........................................................................................................................4 Other documents you may need.........
1 Overview This document contains updated information for your OpenManage Integration for VMware vCenter (OMIVV) and any other technical documentation included with OpenManage Integration for VMware vCenter software. The OpenManage Integration for VMware vCenter 3.1 now supports: ● vCenter; 5.5 U3, 6.0 U1, and 6.0 U2 ● VMware ESXi versions; 5.5 U3, 6.0 U1, 6.0 U2 ● T130, T330, R230, R330, C4130 platforms ● OMSA 8.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter.
Table 2. BIOS for Dell PowerEdge 11 th Generation Servers (continued) Server Minimum Version PowerEdge R515 1.8.6 or later PowerEdge R610 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.0 or later PowerEdge R910 2.5.0 or later PowerEdge M610 6.1.0 or later PowerEdge M610x 6.1.0 or later PowerEdge M710HD 5.0.1 or later PowerEdge M910 2.5.0 or later PowerEdge M915 2.6.
Table 4. BIOS for Dell PowerEdge 13 th Generation Servers Server Minimum version R630 1.0.4 or later T630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.2 or later R530 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later Table 5.
Table 7.
Table 8. Managed Nodes (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 69 TFTP UDP 128-bit In/Out Trivial File Transfer No 111 NFS UDP/TCP 128-bit In SUN Remote Procedure Call (Portmap) No 68 BOOTP UDP None Out Bootstrap Protocol Client No OpenManage Integration for VMware vCenter requirements Supported ESXi versions on managed hosts The following table provides information about the supported ESXi versions on managed hosts.
vCenter version Desktop Client Support Web Client Support v5.1 U2 Y N v5.1 U3 Y N v5.5 U1 Y Y v5.5 U2 Y Y v5.5 U3 Y Y v6.0 Y Y v6.0 U1 Y Y v6.0 U2 Y Y NOTE: For more information on registering a vCenter server, see OpenManage Integration for VMware vCenter, Quick Install Guide v3.1 available at dell.com/support/manuals. Supported features on the Dell PowerEdge chassis This chapter provides information about the supported features on the Dell PowerEdge chassis.
Resource Platform 11th 12th 13th Hardware Configuration Y Y Y Bare Metal Hypervisor Deployment Y Y Y Blink Server LED Y Y Y View/Clear SEL logs Y Y Y Link and Launch iDRAC Y Y Y iDRAC reset Y Y Y *In Cloud with model number C6320, health monitoring is not supported for the mezzanine cards. **In Cloud with model number C6320, firmware updates are not supported for the mezzanine cards.
3 Important notes This section provides important information that you need to consider when you are working on OpenManage Integration for VMware vCenter. ● OpenManage Integration for VMware vCenter supports BIOS mode to deploy Hypervisor on the target server. Make sure that you have BIOS mode selected in the reference hardware profile before applying the Hypervisor profile.
