OpenManage Integration for VMware vCenter Version 5.1 Compatibility Matrix 1 April 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2010 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Default virtual appliance configuration ..........................................................................................................................4 Chapter 2: Supported resources....................................................................................................5 Supported servers and vSAN Ready Nodes.............................
1 Overview This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software. The OpenManage Integration for VMware vCenter 5.1 provides the following features: ● Support for vSphere 7.0 ● Support for firmware remidiation using vSphere Lifecycle Manager ● Support for R7525 and XR2 PowerEdge servers NOTE: Dell EMC recommends using Dell EMC OpenManage Enterprise-Modular Edition Version 1.00.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter. Supported servers and vSAN Ready Nodes Table 2.
Hardware requirements OMIVV supports full support for Dell EMC PowerEdge servers with full feature support for iDRAC Express and Enterprise.
Table 4. Supported BIOS version for 13G PowerEdge servers Server Minimum BIOS Version R830 1.0.2 or later R930 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later T630 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later Table 5. Supported BIOS version for iDRAC9-based PowerEdge servers Server Minimum BIOS Version R240 1.0.0 or later R340 1.0.
Table 5. Supported BIOS version for iDRAC9-based PowerEdge servers Server Minimum BIOS Version MX840C 1.0.0 or later R6515 1.0.3 or later R7515 1.0.3 or later R6525 1.0.0 or later R7525 1.2.4 or later Table 6. Supported BIOS version for vSAN Ready Nodes vSAN Ready Node Minimum BIOS Version R740xd 1.0.0 or later R640 1.0.0 or later R440 1.0.0 or later R6415 1.0.0 or later C6420 1.0.0 or later R840 1.0.0 or later Supported iDRAC with Lifecycle Controller versions Table 7.
Table 9.
Table 10. Supported features on modular infrastructure Features M1000e VRTX FX2s MX Multi-chassis management group relationship information N N N Y Firmware Update N N N Y Storage space required for provisioned storage The OMIVV virtual appliance requires at least 95 GB of disk space for provisioned storage. Default virtual appliance configuration The OMIVV virtual appliance is provisioned with 8 GB of RAM and two virtual CPU (Small Deployment Mode).
Table 12. Supported ESXi versions ESXi Version Platform 12G 13G iDRAC9-based servers 6.0 U3 Y Y N 6.5 Y Y N 6.5 U1 Y Y Y 6.5 U2 Y Y Y 6.5 U3 Y Y Y 6.7 N Y Y 6.7 U1 N Y Y 6.7 U2 N Y Y 6.7 U3 N Y Y 7.0 N Y Y NOTE: The PowerEdge MX host is supported only when used with ESXi 6.5 U2 and later. Port information This section lists all the port requirements to configure your virtual appliance and managed nodes. Table 13.
Table 13. Virtual appliance Port Protocols Number Port Type Maximum Directi Encryptio on n Level Destination Usage Description scripts to communicate with the OMIVV appliance. 443 HTTPS TCP 128-bit In 443 WSMAN TCP 128-bit In/Out 445/139 SMB TCP 128-bit Out 2049 /11 1 NFS UDP/T CP None In/Out OMIVV appliance to NFS Public Share NFS public share that is exposed by OMIVV appliance to the managed nodes and used in firmware update and operating system deployment flows.
3 Important notes This section provides important information that you must consider when you are working on OpenManage Integration for VMware vCenter. ● OMIVV currently supports only the community named "Public" or "public". The SNMP community name is not configurable. If another community name is used, the events are not received by OMIVV and the events are not displayed in the VMware vCenter. ● A system profile created using a reference server with a certain BIOS version can cause deployment to fail.
A Other documents you may need The following documents are available at www.dell.com/support: ● OpenManage Integration for VMware vCenter Version 5.1 User’s Guide ● OpenManage Integration for VMware vCenter Version 5.1 Installation Guide ● OpenManage Integration for VMware vCenter Version 5.
B Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2. Select your support category. 3.
