Users Guide

Table 28. Hardware inventory information (continued)
Hardware
inventory:
Component
Navigation through OMIVV Information
Fabric (Only for
MX chassis)
Use either of the following
methods:
● In the Overview tab, click
Fabric.
● In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
Fabric.
Information about Fabric components:
● Health
● Fabric
● Description
● Switch Count
● Compute Count
● Uplink Count
To view the switches that are associated with the fabric, select a
fabric component and the following information is displayed in the
lower grid:
● Switch
● Chassis
● Slot
● Chassis Role
● Switch Model
PCIe Use either of the following
methods:
● In the Overview tab, click
PCIe.
● In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
PCIe.
Information about PCIe:
● PCIe slot
○ Slot
○ Name
○ Power status
○ Fabric
● Server slot
○ Name
○ Number
To view additional information, select the corresponding PCIe and
following information is displayed:
● Slot type
● Server mapping
● Assignment status
● Allocated slot power
● PCI ID
● Vendor ID
NOTE: PCIe information is not applicable for M1000e chassis.
iKVM Use either of the following
methods:
● In the Overview tab, click
iKVM.
● In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
iKVM.
Information about iKVM:
● iKVM Name
● Present
● Firmware version
● Front Panel USB/Video enabled
● Allow access to CMC CLI
NOTE: You can view information about the iKVM only for
PowerEdge M1000e Chassis
NOTE: The iKVM tab is displayed only if the chassis contains
iKVM module.
Chassis management 105