Users Guide

NOTE: Do not add a PowerEdge MX server with a disabled iDRAC IPv4 to a host credential profile. These servers are
managed using a chassis credential profile.
The selected hosts are displayed on the Associated Hosts page.
4. To test the connection, select one or more hosts, and then click BEGIN TEST. Dell EMC recommends that you test the
connection for all configured hosts.
NOTE: Even after entering valid credentials, the test connection operation may fail for host, and a message is displayed
indicating that invalid credentials are entered. This issue is observed if ESXi is blocking the access. Multiple attempts
to connect the ESXi by using incorrect credentials blocks you from accessing ESXi for 15 minutes. Wait 15 minutes and
retry the operation.
● To stop the test connection, click ABORT TEST.
You can view the test connection results in the TEST RESULTS section.
NOTE: If the WBEM service is disabled for any hosts running ESXi 6.5 or later versions, WBEM is automatically enabled
when you perform the test connection or while running inventory on those hosts.
5. Click Finish.
NOTE: The Date Modified and Last Modified By fields include changes that you perform through the vSphere Client
interface for a host credential profile. Any changes that the OMIVV appliance performs on the respective host credential
profiles do not affect these two fields.
Related tasks
Create host credential profile on page 34
Delete host credential profile on page 38
Related information
Host credential profile on page 34
Create host credential profile on page 34
Delete host credential profile on page 38
Test host credential profile on page 38
View host credential profile
1. On the OMIVV home page, click Compliance & Deployment > Host Credential Profile.
A table displays all the host credential profiles along with the following information:
● Profile Name—Name of the host credential profile
● Description—Profile description, if provided
● vCenter—FQDN, or hostname, or IP address of the associated vCenter
● Associated Hosts—The hosts that are associated with the host credential profile. If more than one associated hosts are
present, use the expand icon to display all.
● iDRAC Certificate Check—Indicates if the iDRAC certificate is verified when creating a host credential profile.
● Host Root Certificate Check—Indicates if the host root certificate is verified when creating a host credential profile.
● Date Created—Date when the host credential profile is created.
● Date Modified—Date when the host credential profile is modified.
● Last Modified By—Details of the user who modified the host credential profile.
NOTE:
If the PowerEdge MX host is managed using the chassis credential profile, the OMIVV indicates it as associated
to a chassis credential profile. For more information, see View chassis credential profile on page 41.
2.
If you want to remove or add the column names from the wizard, click .
By default, the Date Modified and Last Modified columns are not selected. To select these columns, click
.
3. To export the host credential profile information, click
.
Related information
Host credential profile on page 34
Manage hosts using host credential profile
37