Users Guide

View chassis inventory information
Steps
1. On the Dell EMC Chassis page, select a chassis or click Service Tag.
2. In the Chassis Information section, click VIEW.
The Overview page displays the health of the chassis, the active errors, the component level health status of the chassis,
hardware overview, and chassis relation (only for MX chassis).
NOTE: For M1000e version 4.3 and earlier, the active errors are not displayed.
The main pane displays the overall health of a chassis. The valid health indicators are Healthy, Warning, Critical, and
Unknown. In the Chassis Health grid view, the health of each component is displayed. The chassis health parameters are
applicable for models VRTX version 1.0 and later, M1000e version 4.4 and later. For M1000e firmware versions less than 4.3,
only two health indicators are displayed, such as Healthy and Warning or Critical.
The overall health indicates the health that is based on the chassis with the least health parameter. For example, if there are
five healthy signs and one warning sign, the overall health is shown as warning.
Viewing hardware inventory information for chassis
About this task
You can view information about the hardware inventory for the selected chassis.
Steps
1. On the OMIVV home page, click Hosts & Chassis > Chassis > Chassis List.
The Dell EMC Chassis page is displayed.
2. Select a chassis, click the Service Tag link.
The Overview page is displayed.
3. On the Overview page, click Hardware.
Table 10. Hardware inventory information
Hardware
inventory:
Component
Navigation through OMIVV Information
Fans
● On the Dell EMC Chassis
page, click Chassis > Chassis
List, click the Service Tag
link.
● On the Overview page, in the
left pane, select Hardware.
● In the right pane, expand
Fans.
OR
● On the Overview page, click
Fans.
Information about fans:
● Name
● Present
● Identifier (applicable only for MX chassis)
● Power State
● Reading (RPM)
● Warning Threshold (not applicable for MX chassis)
● Critical Threshold (not applicable for MX chassis)
○ Minimum
○ Maximum
●
Pulse Width Modulation (Only for MX chassis)
NOTE: In a PowerEdge MX chassis, the presence of a fan
is indicated as 'Yes' even when a fan is removed from the
chassis. However, the fan health is displayed as Critical on
the Summary page with active error.
Power Supplies
● On the Dell EMC Chassis
page, click Chassis > Chassis
List, click the Service Tag
link.
● On the Overview page, in the
left pane, select Hardware.
Information about power supplies:
● Name
● Capacity
● Present
● Power state
● Input Voltage (Only for PowerEdge MX chassis).
118 Chassis Management