OpenManage Integration for VMware vCenter Version 4.0 Compatibility Matrix June 2017 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Other documents you may need......................................................................................................................................4 Chapter 2: Supported resources....................................................................................................5 Browser and flash player requirements..............................
1 Overview This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software. The OpenManage Integration for VMware vCenter 4.0 provides the following features: ● Support for vSphere 6.5 and 6.0 U2 ● Support for vSphere 6.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter.
Table 2. BIOS for Dell PowerEdge 11 th generation servers Server Minimum version PowerEdge R515 1.8.6 or later PowerEdge R610 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.0 or later PowerEdge R910 2.5.0 or later PowerEdge M610 6.1.0 or later PowerEdge M610x 6.1.0 or later PowerEdge M710HD 5.0.1 or later PowerEdge M910 2.5.0 or later PowerEdge M915 2.6.
Table 4. BIOS for Dell PowerEdge 13 th generation servers Server Minimum version R630 1.0.4 or later T630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.2 or later R530 1.0.2 or later R830 1.0.2 or later R930 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later Table 5.
Table 7.
Table 8. Managed nodes Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 69 TFTP UDP 128-bit In/Out Trivial File Transfer No 111 NFS UDP/TCP 128-bit In SUN Remote Procedure Call (Portmap) No 68 BOOTP UDP None Out Bootstrap Protocol Client No OpenManage Integration for VMware vCenter requirements Supported ESXi versions on managed hosts The following table provides information about the supported ESXi versions on managed hosts: Table 9.
Table 10. Supported vCenter server versions vCenter version Web client support v5.1 U2 N v5.1 U3 N v5.5 U1 Y v5.5 U2 Y v5.5 U3 Y v6.0 Y v6.0 U1 Y v6.0 U2 Y v6.5 Y NOTE: For more information about registering a vCenter server, see OpenManage Integration for VMware vCenter Version 4.0 Web Client Install Guide available at Dell.com/support/manuals. The OpenManage Integration for VMware vCenter version 4.0 supports the following VMware vRealize Operations Manager (vROPS) versions: Table 11.
Table 13.
3 Important notes This section provides important information that you must consider when you are working on OpenManage Integration for VMware vCenter. ● OMIVV supports BIOS mode to deploy hypervisor on the target server. Ensure that you have BIOS mode selected in the reference hardware profile before applying the hypervisor profile. If there is no hardware profile selected, ensure that you manually configure the Boot mode as BIOS and reboot the server before applying the hypervisor profile.
