Manualshelf

Users Guide

ManualsBrandsDell ManualsAnalyticsOpenManage Integration for VMware vCenter
21222324252627282930
Table Of Contents
5. Under the Credentials area, you can edit the User Name, Password, and Verify Password The password that you type
in the Verify Password must be same as the one you entered in the Password field. The credentials entered must have
administrator rights on the chassis.
6. Click Apply. The changes are saved.
7. The Associated Chassis tab lets you test the Chassis and Credentials on the selected chassis. Do one of the following:
● To begin the test, select either one chassis or multiple chassis to check and then click the Test Connection icon. The
Test Result column displays whether or not the test connection is successful.
● You can add or delete either one or multiple chassis to a chassis profile by clicking on the Plus icon.
NOTE: If the chassis are not inventoried, only the IP/host name and Service tag are displayed. The fields Chassis
Name and Model are displayed once the chassis is inventoried.
Deleting Chassis Profiles
To delete Chassis profiles:
1. In the OpenManage Integration, select Manage > Profiles > Credential Profile > Chassis Profiles window.
2. Select a chassis profile that you want to delete and click the Cross (X) Icon. A warning message is displayed.
3. Click Yes to proceed with deletion or click No to cancel deletion.
NOTE: If all the chassis associated to a Chassis profile have been deselected or moved to different profiles, a delete
confirmation message will be displayed mentioning the chassis profile does not have any associated chassis and will be
deleted. Click on OK to delete the chassis profile.
Testing a Chassis Profile
1. In the OpenManage Integration for VMware vCenter, on the Manage > Profiles > Credential Profiles > Chassis Profiles
tab, select a single or multiple chassis profile to test. This action may take several minutes to complete.
2. In the Test Chassis Profile dialog, select the chassis you want to test and then click the Test Connection icon.
3. To abort all selected tests and cancel the testing, click Abort All Tests. In the Abort Tests dialog box, click OK.
4. To exit, click Cancel.
26
Profiles