Users Guide

● To perform no check and not store the Host certificate, do not select the Enable Certificate Check check box.
4. Click Next.
5. In the Associated Hosts page, select one or more hosts for the connection profile and click OK.
6. To test the connection profile, select one or more hosts and select the Test Connection button. This step is optional. This is
used to check whether or not the Host and iDRAC credentials are correct.
7. To complete the profile, click Next. For servers that do not have either an iDRAC Express or Enterprise card, the iDRAC test
connection result states Not Applicable for this system.
Editing a Connection Profile
After you have configured a connection profile, you can edit the profile name, description, associated hosts, and credentials.
NOTE: The vCenters that display during this procedure have authenticated using the same Single Sign On (SSO). If you do
not see a vCenter host, it may be on a different SSO or you may be using a VMware vCenter version less than version 5.1.
NOTE: You are allowed to edit the connection profile irrespective of the license limit
1. In the OpenManage Integration for VMware vCenter, on the Manage > Profiles > Credential Profiles > Connection
Profiles tab, select a connection profile.
2. Click the Edit icon.
3. In the Connection Profile window, on the Welcome tab, read the information and click Next.
4. In the Name and Credentials tab, do the following:
a. Under Profile, type the Profile Name and optional Description.
b. Under vCenter, view the associated hosts for this connection profile. See the note above about why you see the hosts
displayed here.
c. Under iDRAC Credentials, do the following:
● The user name is root and this entry cannot be modified if you do not select the Active Directory. It is not
compulsory that iDRAC user need to use root credential , it can be any Administrator Privilege if the Active directory
is set.
● Domain\Username: Type the username in one of these formats: domain\username, or domain@username.
NOTE:
The following characters are allowed for the user name: / (forward slash), &, \ (backslash), . (period),
" (quotation mark), @, % (percent) (127 character limit).
The domain can contain alphanumeric characters and -
(dash) and . (period) only (254 character limit). The first and last characters for domain must be alphanumeric.
● Password: Type your password.
The following characters are not allowed for the password: / (forward slash), &, \ (backslash), . (period),
" (quotation mark).
● Verified password: Type your password again.
● Enable Certificate Check: The default is a cleared check box. To download and store the iDRAC certificate and
validate it during all future connections, select Enable Certificate Check, or clear the Enable Certificate Check
check box to perform no certificate check and not store the certificate.
NOTE: You need to select Enable if you are using Active-Directory.
d. Under Host Root, do the following:
● Select the Use Active Directory check box to access all the consoles associated with the active directory.
Username: The default usertname is root and cannot be modified. If the Use Active Directory is selected, you can use
any active directory user name.
● Password: Type your password.
The following characters are not allowed for the password: / (forward slash), &, \ (backslash), . (period),
" (quotation mark).
● Verified password: Type your password again.
Profiles
23