OpenManage Integration for VMware vCenter Version 4.1 Compatibility Matrix August 2017 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Default virtual appliance configuration ..........................................................................................................................4 Other documents you may need......................................................................................................................................4 Chapter 2: Supported resources.....
1 Overview This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software. The OpenManage Integration for VMware vCenter 4.1 provides the following features: ● ● ● ● ● ● Support for vSphere 6.0 U3 Support for OMSA 8.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter.
Table 3. BIOS for PowerEdge 11 th generation servers Server Minimum version PowerEdge R515 1.8.6 or later PowerEdge R610 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.0 or later PowerEdge R910 2.5.0 or later PowerEdge M610 6.1.0 or later PowerEdge M610x 6.1.0 or later PowerEdge M710HD 5.0.1 or later PowerEdge M910 2.5.0 or later PowerEdge M915 2.6.
Table 5. BIOS for PowerEdge 13 th generation servers Server Minimum version R630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.4 or later R530 1.0.2 or later R830 1.0.2 or later R930 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later T630 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later Table 6.
Port information Virtual appliance and managed nodes In OMIVV, when you deploy the OMSA agent by using the Fix non-compliance hosts link available in the Fix Non-compliant vSphere Hosts wizard, OMIVV performs the following action: ● Starts the HTTP Client service ● Enables port 8080 ● Makes the port available for ESXi 5.0 or later to download and install OMSA VIB After the OMSA VIB installation is complete, the service automatically stops and the port is closed. Table 9.
Table 10.
Table 11. Supported ESXi versions ESXi version support Server generation 11G 12G 13G 14G v5.5 U3 Y Y Y N v6.0 Y Y Y N v6.0 U1 Y Y Y N v6.0 U2 Y Y Y N v6.0 U3 Y Y Y Y v6.5 N Y Y N v6.5 U1 N Y Y Y The OpenManage Integration for VMware vCenter supports any of the following vCenter server versions: Table 12. Supported vCenter server versions vCenter version Web client support v5.5 U3 Y v6.0 U2 Y v6.0 U3 Y v6.5 Y v6.
Table 14.
3 Important notes This section provides important information that you must consider when you are working on OpenManage Integration for VMware vCenter. ● OMIVV supports BIOS mode to deploy hypervisor on the target server. Ensure that you have BIOS mode selected in the reference hardware profile before applying the hypervisor profile. If there is no hardware profile selected, ensure that you manually configure the Boot mode as BIOS and reboot the server before applying the hypervisor profile.
