Install Guide

Table 8. Supported features on PowerEdge servers
Resource
Platform
11th 12th and 13th 14th
Hardware Inventory Y Y Y
Events and Alarms Y (SNMP v1 only) Y (SNMP v1 and
v2)
Y (SNMP v1 and v2)
Component wise Health Monitoring
*
Y Y Y
BIOS/Firmware Updates
#
Y Y Y
Proactive HA
$
N Y Y
Warranty Information Y Y Y
Host Compliance Y Y Y
Auto/Manual discovery of bare-metal server Y Y Y
Bare-Metal compliance Y Y Y
Hardware Configuration Y Y Y
Bare-Metal Hypervisor Deployment Y Y Y
Blink Server LED Y Y Y
View/Clear SEL logs Y Y Y
Link and Launch iDRAC Y Y Y
iDRAC reset Y Y Y
System Lockdown Mode N N Y
System Profile N N Y
Cluster Profile N Y
^
Y
* In Cloud with model number C6320, health monitoring is not supported for the mezzanine cards.
# In Cloud with model number C6320, firmware updates are not supported for the mezzanine cards.
$ Proactive HA feature is only applicable on vCenter 6.5 or later that has ESXi 6.0 or later. Also, Proactive HA feature is not
supported on servers with embedded PSU and cloud server models.
^ In cluster profile, configuration drift is not supported.
Supported features on PowerEdge chassis
This topic provides information about the supported features on the PowerEdge chassis.
Table 9. Supported features on modular infrastructure
Features M1000e VRTX FX2s
SNMP Alerts Y Y Y
Hardware Inventory Y Y Y
Link and Launch CMC Y Y Y
License Information N/A Y Y
Warranty Information Y Y Y
Health Reporting Y Y Y
10 Introduction