OpenManage Integration for VMware vCenter Version 4.2 Compatibility Matrix April 2018 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2011 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Overview...................................................................................................................... 4 Default virtual appliance configuration ..........................................................................................................................4 Other documents you may need......................................................................................................................................4 Chapter 2: Supported resources.....
1 Overview This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software. The OpenManage Integration for VMware vCenter 4.2 provides the following features: ● ● ● ● ● ● ● Existing Cluster Aware Update is enhanced to support vSAN clusters. It supports driver and firmware updates.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter.
Table 3. BIOS for PowerEdge 11 th generation servers Server Minimum version PowerEdge R515 1.8.6 or later PowerEdge R610 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.0 or later PowerEdge R910 2.5.0 or later PowerEdge M610 6.1.0 or later PowerEdge M610x 6.1.0 or later PowerEdge M710HD 5.0.1 or later PowerEdge M910 2.5.0 or later PowerEdge M915 2.6.
Table 5. BIOS for PowerEdge 13 th generation servers Server Minimum version R630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.4 or later R530 1.0.2 or later R830 1.0.2 or later R930 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later T630 1.0.2 or later T130 1.0.2 or later T330 1.0.2 or later T430 1.0.2 or later M630 1.0.0 or later M830 1.0.0 or later FC430 1.0.0 or later FC630 1.0.0 or later FC830 1.0.0 or later Table 6.
Table 7. iDRAC and Lifecycle Controller for deployment Generation Version PowerEdge 13th generation servers 2.30.30.30 or later 2.30.30.30 or later PowerEdge 14th generation servers 3.00.00.00 and later 3.00.00.00 and later Table 8. BIOS and iDRAC requirements for cloud server Model BIOS iDRAC with Lifecycle Controller C6320 1.0.2 2.30.30.30 or later C4130 1.0.2 2.30.30.30 or later C6420 1.0.0 or later 3.00.00.00 or later C4140 1.0.0 or later 3.00.00.
Table 9. Virtual appliance Port Number Protocol s Port Type Maximum Encryptio n Level Direction Destination Usage Description from iDRAC/ OMSA 445 SMB TCP 128-bit Out OMIVV appliance to CIFS CIFS communication To communicate with windows share. 4433 HTTPS TCP 128-bit In iDRAC to OMIVV appliance Auto Discovery Provisioning server used for auto discovering managed nodes.
Table 11. Managed nodes (iDRAC/CMC) Port Protoco Number ls Port Type Maximum Encryptio n Level Direction Destination Usage Description 4433 HTTPS TCP 128-bit Out iDRAC to OMIVV appliance Auto Discovery For auto discovering iDRAC (managed nodes) in the management station. 2049 NFS UDP None In/Out iDRAC to/ from OMIVV Public Share For iDRAC to access NFS public share that is exposed by OMIVV appliance. That is used for OS deployment and firmware update.
Table 12. Supported ESXi versions ESXi version support Server generation 11G 12G 13G 14G v5.5 U3 Y Y Y N v6.0 Y Y Y N v6.0 U1 Y Y Y N v6.0 U2 Y Y Y N v6.0 U3 Y Y Y Y v6.5 N Y Y N v6.5 U1 N Y Y Y v6.7 N Y Y Y The OpenManage Integration for VMware vCenter supports any of the following vCenter server versions: Table 13. Supported vCenter server versions vCenter version Web client support v6.0 U2 Y v6.0 U3 Y v6.5 Y v6.5 U1 Y v6.
Table 15.
3 Important notes This section provides important information that you must consider when you are working on OpenManage Integration for VMware vCenter. ● OMIVV supports BIOS mode to deploy hypervisor on the target server. Ensure that you have BIOS mode selected in the reference hardware profile before applying the hypervisor profile. If there is no hardware profile selected, ensure that you manually configure the Boot mode as BIOS and reboot the server before applying the hypervisor profile.