Install Guide

Table 11. Supported vCenter server versions
vCenter version Web client support
v6.0 U2 Y
v6.0 U3 Y
v6.5 Y
v6.5 U1 Y
v6.5 U2 Y
v6.7 Y
v6.7 U1 Y
NOTE: For more information about registering a vCenter server, see OpenManage Integration for VMware vCenter Version
4.3 Web Client Install Guide available at Dell.com/support/manuals.
The OpenManage Integration for VMware vCenter version 4.3 supports VMware vRealize Operations Manager (vROPS) version
1.1 and 1.2.
Port information
Virtual appliance and managed nodes
In OMIVV, when you deploy the OMSA agent by using the Fix non-compliance hosts link available in the Fix Non-compliant
vSphere Hosts wizard, OMIVV performs the following action:
● Starts the HTTP Client service
● Enables port 8080
● Makes the port available for ESXi 5.0 or later to download and install OMSA VIB
After the OMSA VIB installation is complete, the service automatically stops and the port is closed.
Table 12. Virtual appliance
Port
Number
Protocol
s
Port
Type
Maximum
Encryptio
n Level
Direction Destination Usage Description
53 DNS TCP None Out OMIVV
appliance to
DNS server
DNS client Connectivity to the DNS server or
resolving the host names.
69 TFTP UDP None Out OMIVV
appliance to
TFTP server
TFTP Client Used for firmware update on 11G
servers with old firmware.
80/443 HTTP/
HTTPS
TCP None Out OMIVV
appliance to
internet
Dell Online
Data Access
Connectivity to the online (Internet)
warranty, firmware, and latest RPM
information.
80 HTTP TCP None In ESXi server to
OMIVV
appliance
HTTP server Used in operating system
deployment flow for post installation
scripts to communicate with the
OMIVV appliance.
162 SNMP
Agent
UDP None In iDRAC/ESXi to
OMIVV
appliance
SNMP Agent
(server)
To receive SNMP traps from
managed nodes.
443 HTTPS TCP 128-bit In OMIVV UI to
OMIVV
appliance
HTTPS server Web services offered by OMIVV.
These Web services are consumed
by vCenter Web Client and Dell
Admin portal.
14 Introduction