White Papers
Table Of Contents
- 1 Introduction
- 2 Baselining and remediation in OMIVV
- 3 Baselining using VMware vSphere Lifecycle Manager
- 1.1
- 1.1
- 1.1
- 3.1 Register vSphere Lifecycle Manager in OMIVV
- 3.2 Prerequisites to use OMIVV as HSM in vSphere Lifecycle Manager
- 3.3 Associate OMIVV as HSM in vSphere Lifecycle Manager image
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 3.4 Examine drift status and resolution
- 1.1
- 1.1
- 1.1
- 1.1
- 3.5 Pre-Check
- 1.1
- 1.1
- 3.6 Remediation in vSphere Lifecycle Manager
- 1.1
- 1.1
- 1.1
- 3.7 vSAN Hardware Compatibility Listing (HCL)
- 4 Common issues when using OMIVV as a Hardware Support Manager
- 1
- 1
- 1
- 5 Conclusion
- 6 Technical Support and Resources
22 Dell EMC OMIVV as a Hardware Support Manager for VMware vSphere Lifecycle Manager
Issue 3: Getting “Host not compatible with the image” error after creating the image.
Firmware compliance shows following error: This host is not compatible with the firmware in the “Firmware
and Drivers Addon” <Name of HSP>.
Figure 18: Firmware compliance error message
Resolution:
This error will occur if you select the HSP which is not relevant for the selected cluster.
Check the description of the HSP and ensure that you are selecting only the HSP created for the cluster on
which you are trying to create vSphere Lifecycle Manager image.
Figure 19: Select HSP and view description