White Papers
Table Of Contents
- 1 Introduction
- 2 Baselining and remediation in OMIVV
- 3 Baselining using VMware vSphere Lifecycle Manager
- 1.1
- 1.1
- 1.1
- 3.1 Register vSphere Lifecycle Manager in OMIVV
- 3.2 Prerequisites to use OMIVV as HSM in vSphere Lifecycle Manager
- 3.3 Associate OMIVV as HSM in vSphere Lifecycle Manager image
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 1.1
- 3.4 Examine drift status and resolution
- 1.1
- 1.1
- 1.1
- 1.1
- 3.5 Pre-Check
- 1.1
- 1.1
- 3.6 Remediation in vSphere Lifecycle Manager
- 1.1
- 1.1
- 1.1
- 3.7 vSAN Hardware Compatibility Listing (HCL)
- 4 Common issues when using OMIVV as a Hardware Support Manager
- 1
- 1
- 1
- 5 Conclusion
- 6 Technical Support and Resources
10 Dell EMC OMIVV as a Hardware Support Manager for VMware vSphere Lifecycle Manager
3.1 Register vSphere Lifecycle Manager in OMIVV
Before selecting HSM in vSphere Lifecycle Manager image, ensure that you register vSphere Lifecycle
Manager in OMIVV.
During first-time installation, you can select the Register with vSphere Lifecycle Manager (vCenter 7.0 and
later) check box while registering vCenter.
Figure 1: vCenter registration
If you want to modify the vSphere Lifecycle Manager status, on the vCenter Registration page, select
Register or Unregister.
Figure 2: After vCenter registration, register option to enable vSphere Lifecycle Manager
If you upgrade OMIVV to 5.1 or later versions using Backup and restore or RPM upgrade method, vCenters
which are registered in earlier OMIVV versions are automatically registered in the updated OMIVV version.