Users Guide

● Setting up global settings. This page lets you choose to deploy hypervisor to a hard disk or Internal Dual SD Module.
● Assigning identification to the deployed servers.
● Matching a desired connection profile to each server.
● Scheduling the server deployment jobs to run.
● Displaying the Job Queue where you can manage deployment jobs.
NOTE: If you’re deploying a hardware profile only, then the new Global Settings, Server Identification, and Connection
Profile pages are skipped and you go directly to the Schedule Job page.
NOTE: For trial/evaluation license, you can use Deployment wizard as long as license is not expired.
Related Tasks:
● Deployment Wizard Step 1: Select Servers
● Deployment Wizard Step 2: Deployment Templates
● Deployment Wizard Step 3: Global Settings
● Deployment Wizard Step 4: Server Identification
● Deployment Wizard Step 5: Connection Profile
● Deployment Wizard Step 6: Schedule Jobs
Deployment Wizard - Step 1: Select Servers
This page covers server deployment. If you want to deploy hypervisor to an Internal Dual SD Module, this page displays whether
that option is available or unavailable. For more information about Internal Dual SD Modules see, Running The Deployment
Wizard. If the server you want to deploy does not display in the list for step 2, you can manually add a server to have it display in
the list for this step, see Adding A Server Manually.
To select servers:
1. In the Dell Management Center, select Deployment > Deployment Wizard.
2. In the Select Servers window, to assign non-deployed servers to this deployment job, use the check boxes to select
Servers.
3. Click Next.
To continue with the task to step two, click Deployment Wizard Step 2.
Deployment Wizard Step 2: Deployment Templates
Deployments to a hardware profile differ from hypervisor deployments. If you are deploying to a hardware profile, click
Deployment Wizard Step 6.
To select a deployment template:
1. Deployment Template selects/creates a deployment template in one of several ways:
● Select an existing deployment template under Available Templates. Information for the selected template populates the
right pane.
● Select an existing deployment template, and then click Edit to change one or both associated profiles.
● Click Create New to define a new template.
2. Select one of the following:
● If you are deploying to a hardware profile, click Next, which jumps you to Deployment Wizard Step 6.
● If you are deploying to a hypervisor profile, click Next, which takes you to Deployment Wizard Step 3.
Deployment Wizard Step 3: Global Settings
You can deploy hypervisor to either a hard drive or an Internal Dual SD Module. If an Internal Dual SD Module is available on at
least one of the servers selected, the Internal Dual SD Module option is enabled by default. If not, both the Hard Disk and
Internal Dual SD Module options are not selected.
To deploy the hypervisor, perform the following steps:
1. In the Global Settings page, select one of the following options:
Hardware Management
57