Release Notes

Table Of Contents

Version Affected: 3.0 and later

Issue 16: Invalid data is displayed for physical disks and virtual disks at datacenter and cluster inventory intermittently.

Description: When you create connection profile for hosts and run an inventory for the hosts, verify the physical disk and virtual

disk information at the datacenter, cluster, and host level. On verification, the host level inventory displays valid data whereas in

some situations, at the datacenter and cluster level, invalid data is displayed along with the valid set of data.

Resolution/Workaround: This issue is infrequent and you can press the Refresh option in the same screen to display valid

data.

Version Affected: 3.0 and later

Issue 17: Adobe Flash error is displayed while viewing the inventory of power monitoring and physical disks information at the

datacenter and cluster level.

Description: In some situations, while viewing the inventory details of a host at the datacenter and cluster level, Adobe Flash

player error 1069 is displayed for the Power Monitoring information. Similarly, Adobe Flash player error 1034 is displayed while

viewing the physical disk information. When either of these error appears, you can only refresh the screen and cannot view

other inventory details. Additionally, you cannot perform actions on Update Firmware and Export.

Resolution/Workaround: This issue is infrequent and you should close dot net client and login again to view another screen.

The Power Monitoing and physical disk information can be only seen from the host inventory screen.

Version Affected: 3.0 and later

Issue 18: Processor Version is not displayed for 12th generation servers on the overview firmware page of host.

Description: For 12th generation servers, processor version is not displayed on the overview page for firmware inventory. This

information is available for 11th and earlier generation systems.

Resolution/Workaround: None