Install Guide

Table Of Contents
Table 9. Virtual appliance
Port
Numbe
r
Protocols Port
Type
Maximum
Encryption
Level
Direction Destination Usage Description
and operating system deployment
flows.
4001 to
4004
NFS UDP
/TCP
None In/Out OMIVV
appliance to
NFS
Public Share These ports must be kept open to
run the statd, quotd, lockd, and
mountd services by the V2 and V3
protocols of the NFS server.
11620 SNMP
Agent
UDP None In iDRAC to
OMIVV
appliance
SNMP Agent
(server)
Port used to receive the standard
SNMP alerts by using UDP: 162.
Data from iDRAC and CMC or OME-
Modular are received to manage and
monitor the managed nodes.
User-
defined
Any UDP
/TCP
None Out OMIVV
appliance to
proxy server
Proxy To communicate with the proxy
server.
Table 10. Managed nodes (ESXi)
Port
Numb
er
Protocols Port
Type
Maximum
Encryption
Level
Direction Destination Usage Description
162,
11620
SNMP UDP None Out ESXi to
OMIVV
appliance
Hardware
Events
Asynchronous SNMP traps that are
sent from ESXi. This port have to open
from ESXi.
443 WSMAN TCP 128-bit In OMIVV
appliance to
ESXi
iDRAC
communic
ation
Used to provide information to the
management station. This port has to
open from ESXi.
443 HTTPS TCP 128-bit In OMIVV
appliance to
ESXi
HTTPS
server
Used to provide information to the
management station. This port has to
open from ESXi.
Table 11. Managed nodes (iDRAC or CMC or OME-Modular)
Port
Numbe
r
Protocols Port
Type
Maximum
Encryptio
n Level
Direction Destination Usage Description
443 WSMAN/
HTTPS,
REST/
HTTPS
TCP 128-bit In OMIVV
appliance to
iDRAC or
CMC or
OME-
Modular
iDRAC
communicati
on
Used to provide information to the
management station and communicate
to MX chassis by using REST or
HTTPS protocols. This port has to
open from iDRAC and CMC or OME-
Modular.
4433 HTTPS TCP 128-bit Out iDRAC to
OMIVV
appliance
Auto
Discovery
For auto discovering iDRAC (managed
nodes) in the management station.
2049 NFS UDP None In/Out iDRAC to/
from OMIVV
Public Share
For iDRAC to access NFS public share
that is exposed by OMIVV appliance.
That is used for operating system
deployment and firmware update.
To access the iDRAC configurations
from the OMIVV. Used in deployment
flow.
14 Introduction