Users Guide

Table 29. Hardware inventory information
Hardware
inventory:
Component
Navigation through OMIVV Information
● In Monitor tab, expand the
left pane, click Hardware
Inventory, and then click I/O
Modules.
● Fabric
● Service Tag
● Power Status
To view additional information, select the corresponding I/O
module and the following information is displayed:
● Role
● Firmware version
● Hardware version
● IP address
● Subnet mask
● Gateway
● MAC address
● DHCP enabled
PCIe Use either of the following
methods:
● In the Overview tab, click
PCIe.
● In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
PCIe.
Information about PCIe:
● PCIe slot
○ Slot
○ Name
○ Power status
○ Fabric
● Server slot
○ Name
○ Number
To view additional information, select the corresponding PCIe and
following information is displayed:
● Slot type
● Server mapping
● Assignment status
● Allocated slot power
● PCI ID
● Vendor ID
NOTE: PCIe information is not applicable for M1000e chassis.
iKVM Use either of the following
methods:
● In the Overview tab, click
iKVM.
● In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
iKVM.
Information about iKVM:
● iKVM Name
● Present
● Firmware version
● Front Panel USB/Video enabled
● Allow access to CMC CLI
NOTE: You can view information about the iKVM only for
PowerEdge M1000e Chassis
NOTE: The iKVM tab is displayed only if the chassis contains
iKVM module.
Chassis management 87